I70F
5Pages

I70F TECHNICAL SPECIFICATIONS I70F SIDE VIEW DIAGRAM • Working Height 75'/22.9 m • Powered Boom Sections • Working Side Reach 56'/17.1 m • Overall Height • Platform Capacity 600 lbs/272 kg 4 11’4”/3.4 m • Unit Weight (Bare) 17,600 lbs/7,983 kg • Platform Size 40x60 in/102x152 cm • Outrigger Spread Main • Platform Type Insulated Top-Mount • Outrigger Spread Auxiliary • Lifting Capacity (Main Winch) • Insulation Rating 18'/5.4 m 8’/2.4 m 3,650 lbs/1,656 kg • Front Gross Axle Weight Rating 13,000 lbs/5,897 kg 46KV Category C • Rear Gross Axle Weight Rating 20,000 lbs/9,072 kg Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 Phone: 402-592-4500 Fax: 402-592-4553 Email: sales@elliottequip.com www.elliottequip.com

HIREACH - I70F TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Maximum Platform Height: 70' ground to platform floor. Working Range: 75' max. height and 56' max. side reach. Work Platform: 40x60" fiberglass topmount work platform with 40" high rails and a grated fiberglass floor. Equipped with two safety lanyard attachment loops, two safety harnesses, and two lanyards. Platform capacity is 600 lbs. Platform Leveling System: Hydraulic "closed" system consisting of twin platform cylinders interacting with a boom-actuated master cylinder mounted in boom support turret. System provided with...

TECHNICAL SPECIFICATIONS MAXIMUM LIFTING CAPABILITIES MAXIMUM WORKING LOADS CRANE OPERATION WINCH LINE LOAD (POUNDS) WITH BUCKETS OR PLATFORM REMOVED USE OUTRIGGERS AT ALL TIMES • AVOID JERKING LOAD DEDUCT 400 POUNDS WITH BUCKETS OR PLATFORM ATTACHED EQUIPMENT COMPANV DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY Elliott Equipment Company Phone: 402-592-4500 Omaha, NE 68127 Email: sales@elliottequip.com

TECHNICAL SPECIFICATIONS MAXIMUM JIB LIFTING CAPABILITIES MAXIMUM WORKING LOADS TOTAL PLATFORM CAPACITY (JIB LOAD PLUS PERSONNEL) USE OUTRIGGERS AT ALL TIMES* AVOID JERKING LOAD DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY EQUIPMENT COMPANY Elliott Equipment Company Email: sales@elliottequip.com

HIREACH - I70F TECHNICAL SPECIFICATIONS CHASSIS DATA I70F Wheelbase (WB) 235” / 597 cm Cab to Axle (CA) 168” / 427 cm Cab to End of Frame (EOF 293” / 744 cm Frame Section Modulus 13.3 in3 / 120,000 psi Front Axle Gross Weight Rating 13,000 lb / 5,897 kg Rear Axle Gross Weight Rating 20,000 lb / 9,072 kg Extended Front Frame Required for Front Stabilizer Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. OPTIONS Radio Remote Control Interference protected radio remotes hardwired to the...