*mydirectindustry

H60F

Product catalog summary

Technical Specifications Overview
The H60F model by Elliott Equipment Company is a versatile aerial work platform with crane capabilities. It features a working height of 65 feet and a side reach of 46 feet. The platform can support up to 600 lbs and measures 40x60 inches. The main winch has a lifting capacity of 5,900 lbs, while the jib winch can handle 1,000 lbs. The unit's overall height is 11’3”, and it weighs approximately 16,500 lbs.

Platform and Controls
The top-mount work platform includes safety features such as lanyard attachment loops and harnesses. It uses a hydraulic closed system for platform leveling, with remote releveling controls available both on the platform and at ground level. The platform controls include electronic controllers for precise operation, and the lower controls are mounted on the roadside of the turret.

Outriggers and Frame
The H60F is equipped with 'MH' type main outriggers and 'A' type auxiliary outriggers, providing stability with an 18’ spread behind the cab. The frame is a one-piece, welded box-type with integral outrigger mounts.

Hydraulic System
The hydraulic system operates at 2,500 PSI and includes a 35-gallon oil tank. It features a gear-type pump directly mounted to the truck PTO, ensuring efficient operation.

Chassis Requirements
The truck chassis must have a 156” cab-to-axle measurement, a front axle weight rating of 13,000 lbs, and a rear axle weight rating of 20,000 lbs. Additional requirements include increased cooling, heavy-duty springs, and a 12V electrical system.

Options and Accessories
Optional features include a high-capacity boom winch, platform jib, and various platform accessories like 110V outlets and hydraulic tools. The unit can also be customized with toolboxes and other bed accessories.

Contact Information
Elliott Equipment Company is located in Omaha, NE. For more information, visit their website or contact them via phone or email.

Catalog excerpts

H60F TECHNICAL SPECIFICATIONS H60F SIDE VIEW DIAGRAM • Working Height 65'/19.8 m • Working Side Reach 46'/14 m • Platform Capacity 600 lbs/272 kg • Platform Size 40x60 in/102x152 cm • Platform Type Top-Mount • Lifting Capacity (Main Winch) • Jib Winch • Powered Boom Sections 3 • Overall Height 11’3”/3.4 m • Unit Weight (Bare) 16,500 lbs/7,484 kg • Outrigger Spread Main 18'/5.5 m • Outrigger Spread Auxiliary 8’/2.4 m 5,900 lbs /2,676 kg • Front Gross Axle Weight Rating 13,000 lbs/5,897 kg 1,000 lbs/454 kg • Rear Gross Axle Weight Rating 20,000 lbs/9,072 kg Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 Phone: 402-592-4500 Fax: 402-592-4553 Email: [email protected] www.elliottequip.com

Open the catalog to page 1

TECHNICAL SPECIFICATIONS MAXIMUM WINCH LIFTING CAPABILITIES MAXIMUM WORKING LOADS CRANE OPERATION WINCH LINE LOAD (POUNDS) WITH BUCKETS OR PLATFORM REMOVED USE OUTRIGGERS AT ALL TIMES • AVOID JERKING LOAD 360° RADIUS • USE 2 PART LINE FOR LOADS OVER 2500 Lbs. DEDUCT 400 POUNDS WITH BUCKET OR PLATFORM ATTACHED DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY EQUIPMENT COMPANY Elliott Equipment Company Email: [email protected]

Open the catalog to page 3

HIREACH - H60F TECHNICAL SPECIFICATIONS CHASSIS DATA H60F Wheelbase (WB) 224” / 569 cm Cab to Axle (CA) 156” / 396 cm Cab to End of Frame (EOF) 272” / 691 cm Frame Section Modulus 13.3 in3 / 120,000 psi Front Axle Gross Weight Rating 13,000 lb / 5,897 kg Rear Axle Gross Weight Rating 20,000 lb / 9,072 kg E xtended Front Frame Required for Front Stabilizer Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. OPTIONS MH Outriggers With Shortjacking Reduce outrigger spread with auxiliary MH outriggers...

Open the catalog to page 4

H60F

H60F

Catalog excerpts

All Elliott Equipment Company catalogs and technical brochures