45142
10Pages

BOOmlrilCfC 45142 TECHNICAL SPECIFICATIONS 45142 SIDE VIEW DIAGRAM • Maximum Vertical Reach • Working Area • Lifting Capacity • Boom Length • Crane Weight (Standard) • Winch Bare Drum Pull • Powered Boom Sections 5 • Operator Controls Rotating Cab with Control Seat • Outrigger Type Front Out-Down • Outrigger Spread Front 21 '2 76,4 m • Outrigger Type Rear Out-Down • Outrigger Spread Rear 26'2'78 m EQUIPMENT COMPANY Elliott Equipment Company Email: sales@elliottequip.com

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Crane Capacity: 90,000 lbs at 7’ radius. hook-boom point contact. Maximum Tip Height: 152’ tip height (207’ with 55’ jib). Outriggers: Two sets of out and down overframe outriggers. Front outriggers have a 21’2” span, rear outriggers have a 26’2” span. Outriggers are configured for full span or mid span operation. Outriggers equipped with 22” diameter ball socket aluminum removable pads that stow on vertical outrigger legs. Control Console: Rotating seated controls with operator cab and deluxe operators seat. Station equipped with four pilot...

TECHNICAL SPECIFICATIONS LOAD CHART - FULL SPAN OUTRIGGERS ELLIOTT MODEL 4500 142-ft BOOM EQUIPMENT COMPANY MAIN BOOM LOAD RATINGS WITH FULLY EXTENDED OUTRIGGERS MAIN BOOM LOAD RATINGS LOAD RATINGS IN to WITH OUTRIGGERS AND STABILIZERS EXTENDED REAR FRONT JL 26' - 2' FULL SPAN OUTRIGGERS JL JL 21' - 2 FULL SPAN OUTRIGGERS JL AT FULL HORIZONTAL EXTENSION *' OUTRIGGER LOCK PINS DISENGAGED AND BEAMS AT FULL HORIZONTAL EXTENSION ELLIOTT EQUIPMENT CO. SUPPLIED LOADLINE EQUIPMENT DEDUCTIONS: CRANE MEETS ASME B30.5 REQUIREMENTS AT TIME OF MANUFACTURE DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY...

TECHNICAL SPECIFICATIONS LOAD CHART - MID-SPAN OUTRIGGERS ELLIOTT MODEL 4500 142-ft BOOM EQUIPMENT COMPANY MAIN BOOM LOAD RATINGS WITH MIDSPAN OUTRIGGERS LOAD RATINGS IN lis WITH OUTRIGGERS AND STABILIZERS EXTENDED 1. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom lengths. 3. Do not exceed capacities recommended by ASME/ANSI B30.5. 4. Load ratings above bold line are structurally limited. 5. Personnel handling is...

TECHNICAL SPECIFICATIONS RANGE CHART - FULL SPAN OUTRIGGERS EQUIPMENT COMPANY RANGE DIAGRAM WITH FULLY EXTENDED OUTRIGGERS RANGE DIAGRAM WITH FULL SPAN OUTRIGGERS I. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom 3. Capacities do not exceed 85% stability. 4. Load ratings above bold line are structurally limited. 5. Personnel handling is allowed only with full span outriggers. 6. Boom load ratings are based on loaded...

TECHNICAL SPECIFICATIONS JIB CHART - FULL-SPAN OUTRIGGERS, 32'-55' TWO SECTION JIB LOAD RADIUS FROM CENTERLINE OF ROTATION IN FEET CRANE MEETS ASME B30.5 REQUIREMENTS AT TIME OF MANUFACTURE DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY Elliott Equipment Company Phone: 402-592-4500 Omaha, NE 68127 Email: sales@elliottequip.com

TECHNICAL SPECIFICATIONS RANGE CHART - JIB & 2-MAN BASKET 600 LB / 272 KG CAPACITY ELLIOTT MODEL 4500 142-ft BOOM EQUIPMENT COMPANY 2 PIECE FULLY EXTENDED JIB RANGE DIAGRAM WITH PLATFORM ATTACHED LMI MODE: BSKT1_55' 1. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom lengths. 3. Do not exceed capacities recommended by ASME/ANSI B30.5. 4. Load ratings above bold line are structurally limited. 5. Personnel handling is...

TECHNICAL SPECIFICATIONS RANGE CHART - JIB & 2-MAN BASKET 1,200 LB / 544 KG CAPACITY EQUIPMENT COMPANY 2 PIECE FULLY EXTENDED JIB RANGE DIAGRAM WITH PLATFORM ATTACHED 1. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom lengths. 3. Do not exceed capacities recommended by ASME/ANSI B30.5. 4. Load ratings above bold line are structurally limited. 5. Personnel handling is allowed only with full span outriggers. 6. Boom...

TECHNICAL SPECIFICATIONS MAIN BOOM WINCH DATA ELLIOTT MODEL 4500 142-ft BOOM EQUIPMENT COMPANY BOOM HEAD SNATCH BLOCK BOOM HEAD SNATCH BLOCK - DO NOT DEADHEAD LINE BLOCK AGAINST BOOM TIP WHEN EXTENDING - KEEP AT LEAST 5 WRAPS OF LOADLINE ON THE WINCH DRUM AT ALL TIMES. - USE ONLY 5/8" DIAMETER WIRE ROPE, AS SPECIFIED, WITH THE PROPER BREAKING STRENGTH LISTED. - ANTI-TWO-BLOCK SYSTEM MUST BE IN GOOD OPERATING CONDITION BEFORE OPERATING CRANE. SEE OPERATION & SAFETY MANUAL. BOOM HEAD SNATCH BLOCK A-DEAD END FOR ODD PARTS OF LINE B-DEAD END FOR EVEN PARTS OF LINE R-ROOSTER SHEAVE REQUIRED WHEN...

TECHNICAL SPECIFICATIONS TRUCK CHASSIS SPECIFICATIONS Frame Section Modulus Front Axle Gross Weight Rating Rear Axle Gross Weight Rating Pusher Axle Rating Permit-Free Truck Configurations Contact Factory for More Information Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. *Minimum chassis weight is required to meet 85% stbility requirements. OPTIONS Radio Remote Control Interference protected radio remotes let you get closer to your work and have full control over your machine....