36127F
7Pages

TECHNICAL SPECIFICATIONS DIMENSIONS ARE APPROXIMATE AND VARY WITH TRUCK SPECIFICATIONS • Maximum Vertical Reach • Crane Weight (Standard) • Jib Lengths • Winch Bare Drum Pull Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 ASSEMBLY WEIGHT: • Operator Controls • Boom Length EQUIPMENT COMPANY • Powered Boom SectionsTITLE GVWR-66,000 LBS FRONT AXLE-20,000 LBS REAR AXLE-46,000 LBS ESTIMATED WT. (1) PERSON & FUEL-54,250 LBS FRONT AXLE-20,000 LBS REAR AXLE- 34,250 • Working WT.-18,700 LBSDegreesAXLE-10,400 LBS REAR AXLE-8,300 LBSOverall • CHASSIS Area 180 FRONT Standard (360 Optional) • Lifting Capacity • Outrigger Spread Front TOLERANCE (Unless noted otherwise): .X=`.125 .XX=`.060 .XXX=`.030 Angle=`1~ • Outrigger Type Front 4427 South 76th Circle Omaha, Nebraska 68127 P0022200.idw Rotating Standup SCALE • Outrigger Type Rear Out-Down • Outrigger Spread Rear Phone: 402-592-4500 Fax: 402-592-4553 Email: sales@elliottequip.com

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Crane Capacity: 72,000 lbs at 5’ load radius. Maximum Tip Height: 137’ height (186’ with optional 49’ jib) Control Console: Rotating turret single operator standup control station equipped with four single axis control levers for the main crane controls. Operator station includes LMI display, bubble level gauge, engine start/stop switch, signal horn button, variable speed throttle switch, lifting capacity chart, range diagram chart, boom angle indicator, system pressure gauge, 12V DC power source, and cup holder. Independent ground level...

TECHNICAL SPECIFICATIONS LOAD CHART - MAIN BOOM, FULL-SPAN OUTRIGGERS EQUIPMENT COMPANY LOAD RATINGS WITH FULLY EXTENDED OUTRIGGERS MAIN BOOM LOAD RATINGS (lbs) 21'-2" FULL SPAN OUTRIGGERS OUTRIGGER LOCK PINS DISENGAGED AND BEAMS AT FULL HORIZONTAL EXTENSION ELLIOTT EQUIPMENT CO. SUPPLIED LOADLINE EQUIPMENT DEDUCTIONS: DEDUCTIONS FOR STOWED EXTENDABLE JIB (lbs) MINIMUM BOOM ANGLE (°) FOR INDICATED LENGTH (NO LOAD) MAXIMUM BOOM LENGTH (FT) AT 0° BOOM ANGLE (NO LOAD) -PART LINE BLOCK AGAINST BOOM TIP WHEN EXTENDING BOOM. - KEEP AT LEAST 5 WRAPS OF WIRE ROPE, AS SPECIFIED BELOW, WITH THE...

TECHNICAL SPECIFICATIONS LOAD CHART - MAIN BOOM, MID-SPAN OUTRIGGERS EQUIPMENT COMPANY LOAD RATINGS WITH OUTRIGGERS AT MID-SPAN POSITION MAIN BOOM LOAD RATINGS (lbs) OUTRIGGER LOCK PINS ENGAGED ELLIOTT EQUIPMENT CO. SUPPLIED LOADLINE EQUIPMENT DEDUCTIONS: DEDUCTIONS FOR STOWED EXTENDABLE JIB (lbs; MINIMUM BOOM ANGLE (°) FOR INDICATED LENGTH (NO LOAD) MAXIMUM BOOM LENGTH (FT) AT 0° BOOM ANGLE (NO LOAD) PART LINE 2-PART LINE 3-PART LINE 4-PART LINE 5-PART LINE 6-PART LINE 7-PART LINE BLOCK AGAINST BOOM TIP WHEN EXTENDING BOOM. - KEEP AT LEAST 5 WRAPS OF WIRE ROPE, AS SPECIFIED BELOW, WITH THE...

TECHNICAL SPECIFICATIONS RANGE CHART - MAIN BOOM + JIB, FULL-SPAN OUTRIGGERS ELLIOTT MODEL 3600 127-ft BOOM EQUIPMENT COMPANY RANGE DIAGRAM WITH FULL SPAN OUTRIGGERS LOAD RADIUS FROM CENTERLINE OF ROTATION IN FEET BOOM DEFLECTION NOT SHOWN 21' -2" FULL SPAN OUTRIGGERS OUTRIGGER LOCK PINS DISENGAGED AND BEAMS AT FULL HORIZONTAL EXTENSION 1. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom lengths. 3. Capacities do not...

TECHNICAL SPECIFICATIONS RANGE CHART - MAIN BOOM + JIB, MID-SPAN OUTRIGGERS ELLIOTT MODEL 3600 127-ft BOOM EQUIPMENT COMPANY RANGE DIAGRAM WITH OUTRIGGERS IN MID-SPAN POSITION BOOM DEFLECTION NOT SHOWN LOAD RADIUS FROM CENTERLINE OF ROTATION IN FEET OUTRIGGER LOCK PINS ENGAGED 1. Operate jib by radius when main boom is fully extended. Increase boom angle if necessary to maintain load radius. 2. When boom is retracted, operate jib by boom angles. Do not exceed any rated jib capacities at reduced boom lengths. 3. Capacities do not exceed 85% stability. 4. Load ratings above bold line are...

TECHNICAL SPECIFICATIONS TRUCK CHASSIS SPECIFICATIONS Frame Section Modulus Front Axle Gross Weight Rating Rear Axle Gross Weight Rating I ntegral Front Frame Rails Required for Front Stabilizer Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. *Minimum chassis weight is required to meet 85% stbility requirements. OPTIONS Radio Remote Control Interference protected radio remotes let you get closer to your work and have full control over your machine. Includes battery charging feature and...