Ultra High Power LED Light Source for Fluorescence Microscope Ver. 08 Introduction The Ultra High Power LED provides almost x10 increase of power in comparison with similar High Power LED devices. The Ultra High Power LED (38 Watt) is an effective replacement of lasers and lamps in many power demanding applications, such as fluorescence microscopy, machine vision, chemical reaction activation and numerous others. This new member of the modular OptiBlocks family provides >0.9 Watt of collimated Green LED power on its output. The LED driver supports CW or pulsed operation via TTL trigger. • Compatible with Prizmatix modular Microscope-LED Light Source products family - see below for details • Single chip Ultra High Brightness White LED • Optically isolated TTL input for external triggering (no shutter needed) • LED spectrum can be narrowed by optional band pass filter or a filter wheel. • Analog Input for external power control by A/D module (Optional feature) • Computer control via USB and LabView software (Optional feature) • Stable precisely adjustable power • Long life (no lamp or laser tube replacement required) • Speckle free • Rapid warm up time Applications • Fluorescence microscopy (Alexa Fluor 514, Cy3, SNAFL®, SNARF®, FM 4-64) • Whole body imaging of small animals in-vivo • Photo activation (PA) • Fluorescence recovery after photo bleach (FRAP) • Fluorescence in situ hybridization (FISH) • Bio analysis • Machine Vision Main Office Phone: +972-72-2500097 Fax: +972-72-2500096 European Sales Office Phone: +44-(0)77-9172-9592 Fax: +44-(0)20-7681-2977 North America Sales Office Phone: +1-(248)-436-8085

Main Office Phone: +972-72-2500097 Fax: +972-72-2500096 European Sales Office Phone: +44-(0)77-9172-9592 Fax: +44-(0)20-7681-2977 North America Sales Office Phone: +1-(248)-436-8085

Main Office Phone: +972-72-2500097 Fax: +972-72-2500096 European Sales Office Phone: +44-(0)77-9172-9592 Fax: +44-(0)20-7681-2977 North America Sales Office Phone: +1-(248)-436-8085

Prizmatix Optional Accessories For full details on optional accessories please see: http://www.prizmatix.com/optogenetics/Optogenetics-LED-Light-Sources-and-FiberOptics.htm Beam Combiner [2]: Multiple LED beams can be combined into one output beam. For example UV LED can be combined with White LED to create Mercury lamp like configuration. For more details please see: http://www.youtube.com/watch?v=iv7dlwLHaUE Filter Wheel [7]: The UHP-Mic-LED can equipped with a 6 positions filter wheel at the beam output. This accessory is especially useful for UHP-Mic-LED-White light source. Please see http://www.prizmatix.com/Optics/filter-wheel.htm...