E-Val™ Pro
16Pages

{{requestButtons}}

Catalog excerpts

E-Val™ Pro - 1

The next generation in real-time thermal validation

Open the catalog to page 1
E-Val™ Pro - 2

E-Val™ Pro 40 channel module Food: • Retorts • PiLot VesseLs • Freezers • ALarm Monitoring • Smoke Houses • Ovens • Roasters • Aseptic The E-VaL Pro Thermal Validation System is designed for validation applications that require compliance with FDA guidelines and international GMP standards. The E-Val Pro greatly simplifies and correctly documents the entire validation process. The ValSuite Pro software keeps a complete database on all aspects of your vaLidation requirements - tracking thermocoupLes, calibration reports, test setup, data analysis, specific user access and finaL compLiance...

Open the catalog to page 2
E-Val™ Pro - 3

Stand-alone 4 to 40 Channel Modules Wide Measuring Range USB and Ethernet Network Premium grade thermocouple Smart USB connection with ID and cold junction 512 MB Memory 8" touch display Battery Power Small size (3.0 kg / 6.6 lbs) Aluminum housing Compliance Reports Custom Reports Print Reports Security Compliance Same Software Platform for E-Val Pro and TrackSense® Pro Data Loggers Noise level Runs without PC on factory floor Expandable up to 120 channels logging every second -200 to +1,300 °C (ready for -270 °C to +1,820 °C) Fast and reliable data transmission / Compatible with most PC's...

Open the catalog to page 3
E-Val™ Pro - 4

The E-Va[M Pro module has many expansion possibilities The E-Val Pro modules are available with 4 to 40 channels that can handle any type of thermocouple, analog or digital sensors (pressure/RH), as well as digital input/output signals. The LCD display automatically shows all active channels showing time, temperature, pressure, and lethality for each channel. Real-time statistics are also available on the display. Measuring range from -200 to +1,300 °C. Operating range from +5 to +50 °C. Resolution 0.01 °C. The sampling rate can be set from 1 second to 24 hours independent of the number of...

Open the catalog to page 4
E-Val™ Pro - 5

Since the late 1940’s Ellab has been combining hardware, software, probes and fittings in order to provide customers with customized “turn-key” Thermal Validation Solutions. The ValSuite™ Pro software is compatible with E-Val Pro, TrackSense® Pro loggers, temperature standards and a variety of baths/dry b

Open the catalog to page 5
E-Val™ Pro - 6

Fittings & Accessories Fittings and accessories for placing probes and inserting Custom Fittings Packing glands and other fittings are available for probe placement in a variety of packaging materials. The glands are threaded to accept the tips and will maintain the seal when pressurized. It is very important that the tips are placed correctly in the “cold/hot zone” to obtain true lethality values. See examples of typical applications and configurations below. ID Label ID labels are sold in sets of 1-16 pieces for easy identification during thermocouple placement. Feed Through Provides...

Open the catalog to page 6
E-Val™ Pro - 7

GLK Probes can be mounted in plastic ampoules in moist heat sterilization applications. TPJ Probes can be mounted in pouches for sterilization applications. GVJ Measurements inside ampoules and vials is possible with this packing gland. GPK Probes can be mounted in vials for terminal sterilization. GEJ This fitting is ideal for very small plastic containers. GVK This packing gland can be mounted on bottle necks for liquid applications. GNK Probes can be mounted on ampoules in moist heat sterilization applications. GKJ Probes can be mounted externally with this packing gland.

Open the catalog to page 7
E-Val™ Pro - 8

Probes & Sensors High Precision Thermocouple Probes Using premium grade probes dramatically improves accuracy and stability, resulting in more successful studies. Ellab develops and manufactures a wide range of type T thermocouples for a variety of purposes (probes for frozen applications, special probes for liquids and air, probes for hot air ovens and autoclaves, high temperature probes, etc). The standard and penetration probes are supplied with threads that fit into packing glands for a leak-free seal into packages or cans. Smart USB Connectors The USB connectors consist of...

Open the catalog to page 8
E-Val™ Pro - 9

Digital Pressure Sensor Piezoresistive measuring principle Temperature compensated to +150 °C Material: Stainless steel Cable length: 5 m Operating range: 0 to 4 bar (abs.) Accuracy: ±6 mbar SSA-TS Operating range: -20 to +135 °C Accuracy: < 0.2 °C/calibrated ±0.05 °C Response time: 1.0 sec (T63)/1.8 sec (T90) Electrode material: Stainless steel Electrode 0: 1.2 mm Electrode end: Round/sharp/conic Cable material: Silicone Cable dimensions: 0 4.0 mm SSA-TF “ Operating range: -50 to +135 °C t Accuracy: < 0.2 °C/calibrated ±0.05 °C F Response time: 1.0 sec (T63)/1.8 sec (T90) Electrode...

Open the catalog to page 9
E-Val™ Pro - 10

Intuitive and user friendly software The easy way to put the ValSuite Pro software to work: 1 Login, program and start the E-Val Pro using a Repeat function, which includes a unit configuration and a selection of reports. Place the probes in the load or process and run the cycle. Record the data. Data analysis and reports are made automatically. E-Val Pro Print the reports and logout. Valsuite Pro Data Integrity is approved by Quality Compliance Partners Inc. ValSuite™ Pro Software ValSuite Pro is an intuitive validation software which collects and presents validation data from all Ellab...

Open the catalog to page 10
E-Val™ Pro - 11

E - V A L P R O I P A G E 11 Operator: Process: Session Start: Session Stop: Session Name: Session Text: Validation Manager Food 02-03-2017 18:46:37 02-03-2017 23:19:41 Sterilization 121°C Sterilization at 121 °C Vessel: Product: Time Zone: Retort Food UTC offset 07:00:00 Validation Solutions Sensor Adjustment Report Sensor Adjustment Report Operator: Sensor adjustment report Limit report Retort Validation Manager Vessel: Product: Food Process: Food Sensor Value Standard Value Deviation Calibration Timestamp Time Zone: UTC offset 07:00:00 Session Start: 02-03-2017 18:46:37 N/A N/A N/A N/A...

Open the catalog to page 11
E-Val™ Pro - 12

Producing Reports A complete set of reports can be produced with Pass/ Fail criteria, detail on mapping positions, operator and vessel ID, calibration offsets for probes, data list and statistical summaries on the data. EN15883 for washer disinfectors and NFX 15-140 for stability chambers. The templates can be customized to organize the data and perform calculations to exact criteria. ValSuite Pro also maintains templates for reports designed to meet the specific requirements of tests such as EN17665 for moist heat autoclaves or This feature greatly reduces the time needed for the data...

Open the catalog to page 12

All Ellab Validation & Monitoring Solutions catalogs and technical brochures

  1. SteriSense®

    8 Pages