ROLL-OFF CONTAINERS

ELKOPLAST CZ, s.r.o. is a company with international scope of activities in deliveries of containers and other technologies for collection, sorting, compaction and transport of waste. Some other products have been gradually included in our assortment, these products find application in other fields of activities, including building industry, automotive industry, agriculture and other sectors. Manufacture of waste containers In 1991 we built our first production line which served exclusively for manufacture of fibreglass containers intended for collection of sorted municipal waste. In the course...

03 Standard version ABR-DSD/ASD 05 Stackable version ABR-STH 07 Railway transport version ABR-ACTS 04 Lightweight version ABR-WD 06 Rubble transport version ABR-HBS

SKIP CONTAINERS Skip containers are intended for the transport and storage of municipal and industrial waste. Various special modifications enable the containers to be used for other purposes (manipulation by crane at building sites, mobile storage units, etc.). Containers are supplied in a variety of styles according to the required use. They are manoeuvred by the arm container truck. Containers are coated with anticorrosive painting and quality top paint in any color. Selected types can be manufactured in a hot-dip galvanized version. Standard types: - SM - symmetric version, AM - asymmetric...

CITY CONTAINERS They find their use for the transport and storage of different materials such as municipal waste, industrial waste, rubble and loose material. Usually transported by vehicles with a maximum weight allowance of 3,5 to 12 tons. These vehicles can also be used as a transport platform or a store. The standard lifting hook height is 1 000 mm, it can be lower or higher according to customer’s request. Top painting in any colour according to RAL. Volumes and standard version : - Various options: - sides: fixed – foldable eventually removable, - doors: flap door (hinges on the top) -...

STANDARD VERSION ABR-DSD/ASD Standard design containers are mostly suitable for the collection and transport of general municipal and industrial waste. Suitable for transport and store of loose material too. acc. to the German (DIN 30 722) or to the French (NF R 17-108) norms, hook, cable, chain lifting system or a combination of these ones, EN S235 event. S355 steel, thickness 2 - 6 mm, continuous welding (except for the bottom reinforcements where disconnected welding used), - top profile – square section 100 × 80 × 4 mm event. tube 89 × 6 mm, - rails and lifting made of IPN 180, rear frame...

LIGHTWEIGHT VERSION ABR-WD After taking into account the effectiveness of transport and the changing prices of materials, since 2006 we have been designing and producing lightweight containers. Today, we offer a complete line of containers ranging from 7 cubic metres to 50 cubic metres. They are used by dozens of companies throughout Europe. The structural design and the minimum welding joints guarantee extraordinary strength and life-time of the conoints th tainers. ainers. To achieve the best weight-to-load ratio, we use solely higher quality steel. Different characteristics of the used materials...

STACKABLE VERSION ABR-STH Designed to transport rubble, soil and other materials. Easy to stack by means of a hook container truck, therefore several containers can be transported at once. They are equipped with a tilting ramp suspended by two strong springs. Specification: - produced acc. to the German (DIN 30 722) or French (NF R 17-108) norm, - a foldable lifting hook, - the bottom 5 mm, the sides and door 3 mm, - a robust square section top profile, - special wheels for stacking.

RUBBLE TRANSPORT VERSION ABR-HBS Robust version to transport rubble and aggregates. Designed to achieve the maximum resistance in tough conditions. Made of wear-resistant high-strength steel (HB 400/450) and a robust top profile of QSTE steel. made entirely of HB 400/450 steel with a thickness of 5 mm, reinforced frame of IPN 180, a raised front and a dismountable flap door, mechanical, hydraulic or pneumatic operation of the flap door (type ABR-HBS-R). rear r part of container s special version from Hardox

RAILWAY TRANSPORT VERSION ABR-ACTS ACTS (abbreviation of “Abroll-Container-Transport-System”) is a transport system for combined road-railway transport. Special containers are used, transported either on special railway wagons or on trucks. The containers are produced according to strict technical standards. Transported on four-axle platform railway wagons, which allow a maximum of 3 containers to be transported at a time. The containers are placed on turning platforms. The transhipment on/from this wagon is made by hook container truck. General advantages for our customers: - sufficient production...

SPECIAL VERSIONS Based on customer requests, we supply containers suitable for the collection and transport of dangerous wastes, heavy steel waste, the transport of liquids and other materials. We are ready to design a version to fulfil your individual needs regarding the load capacity, weight, way of charging and discharging, the securing of the loaded material, way of transport and so on. Examples of the most common special versions: - a sealed door provided with tightening bolts for the transport of dangerous wastes, - a hydraulically controlled flap door enabling easy and fast manipulation...

© Produkce 24, s.r.o., 2010 E ELKOPLAST CZ, s.r.o. AST Štefánikova 2664 76001 Zlín tel.: +420 575 571 000 fax: +420 575 571 099 99 e-mail: [email protected] ast.cz www.elkoplast.cz