Eliwell France 1 avenue de l'ormeteau, 92230 Gennevilliers, France tel: +33 (0)1 41 47 71 61 www.eliwell.eu Single stage controller for temperature The ID 961 controllers are devices suitable for applications on normal temperature refrigerating units. They are provided with a PTC thermostatic probe input (NTC can be selected by parameter) and a relay output for compressor management. Defrost cycles are controlled at time intervals by stopping the compressor. The value of the probe’s reading is viewed on a display with two digits and a minus sign for ID 961, three digits and a minus sign for ID 961 LX. All versions are provided with a TTL connection in order to use Copy Card, the quick programming accessory. The 16 A compressor relay options and the buzzer are also provided. These controllers are available in the 32x74 standard format with a choice of 230 Va or 12 Va/c power supply voltage. Technical Data Frontal protection plastic resin PC+ABS UL94V–0 Usage temperature Storage temperature Usage environment humidity Storage environment humidity TTL port for Copy Card 3½ digits plus sign above 0.5% of bottom scale + 1 digit 1°C or 0.1°C (selectable with a parameter). Power supply 1/2 The continuous improvement of our products can cause some variations in this document even without notice.

Eliwell France 1 avenue de l'ormeteau, 92230 Gennevilliers, France tel: +33 (0)1 41 47 71 61 www.eliwell.eu 2/2 The continuous improvement of our products can cause some variations in this document even without notice. Powered by TCPDF (www.tcpdf.org)