Catalogs >
Elite Line Industrial Corp. >
SOLENOID CONTROL VALVE

SOLENOID CONTROL VALVE
1Pages

Catalog excerpts

SOLENOID CONTROL VALVE ¥ Solenoid control valve is a kind of isolation valve, which can substitute traditional gate valves, ball valves and butterfly valves. The gate functioning is easily controlled by electrical power. The valve can be installed in fire control facility, water supply, or distant location where it's difficult to control the gate opening. The controller is directly fixed and can be easily installed on piping site. Interchangeable between manual and solenoid control. Ball valve must be closed Ball valve ^ Specification of Solenoid Control Switch ► Electrifying Time Range > 1 year continuously for 10,000 hours ► Allowable Voltage Range : ±10% ► Applied Pressure Range ' 0.3 ~ 10 kgffcm2 ► Generally NC type (open when switch on), special order is needed for NO type (close when switch off). ► The working pressure should be greater than 0.3 kgffcm2, please check the pressure before installation. ► Please remove impurities or metal dusts inside the pipe thoroughly. If possible, please add filter to prevent pipe blocking. ► Avoid upside-down installation under insufficient flow.(Valve's inlet should face up when it is installed)

Open the catalog to page 1