- Catalogs
- Elite Line Industrial Corp.
- LOW PRESSURE TYPE DIRECT-ACTIVATED PRESSURE REDUCING VALVE ( stainless Steel 316)
LOW PRESSURE TYPE DIRECT-ACTIVATED PRESSURE REDUCING VALVE ( stainless Steel 316)
LOW PRESSURE TYPE DIRECT-ACTIVATED PRESSURE REDUCING VALVE ( stainless Steel 316)
- Material: Valve body made of Stainless Steel 316, suitable for fluid, air, and oil.
- Diaphragm: Larger diaphragm for increased sensitivity to pressure.
- Pressure Adjusting Range: 0.2 ~ 1.5 kgf/cm² and 0.6 ~ 2.0 kgf/cm².
- Temperature Range: -15°C to 80°C.
- Testing Pressure: Valve body tested at 16 kgf/cm².
- Maximum Pressure: 10 kgf/cm².
- Installation: Horizontal installation with adjusting stem pointing down is required.
- Pressure Gauge: Stainless Steel
- Upper Cover: Stainless Steel 316
- U-ring: NBR / Viton
- Piston: Stainless Steel 316
- Sealing Spacer: NBR / Viton
- Shaft: Stainless Steel 316
- Main Body: Stainless Steel 316
- Diaphragm: EPDM/ Viton
- Lower Cover: Stainless Steel 316
- Fixed Bolt: Stainless Steel 304
- Spring: Spring Steel
- Washer: Brass
- Adjusting Stem: Stainless Steel 304
- RELT15-S: Weight 13 kg, CV 24
- RELT20-S: Weight 15 kg, CV 9.0
- RELT25-S: Weight 16 kg, CV 11.0
- RELT40-S: Weight 3.0 kg, CV 21.0
- RELTS50-S: Weight 4.0 kg, CV 25.0
- RELF15-S: Size 1/2”, H 110 mm, L 150 mm, Weight 2.5 kg, CV 2.4
- RELF20-S: Size 3/4”, H 125 mm, L 150 mm, Weight 3.5 kg, CV 9.0
- RELF25-S: Size 1”, H 125 mm, L 150 mm, Weight 5.6 kg, CV 11.0
- RELF40-S: Size 1.5”, H 155 mm, L 190 mm, Weight 8.7 kg, CV 21.0
- RELF50-S: Size 2”, H 155 mm, L 190 mm, Weight 13.5 kg, CV 25.0
Catalog excerpts
LOW PRESSURE TYPE PRESSURE REDUCING DIRECT-ACTIVATED VALVE ( stainless Steel 316) > Valve Body is made by Stainless Steel #316, suitable for fluid, air and oil. > Larger diaphragm is more sensitive to pressure. » Pressure Adjusting Range © 0.2 ~1.5 kgf/cm’ 0.6 ~2.0 kgf/cm’ » Applied Temperature : -15~80°C » Valve Body Testing Pressure : 16 kgf/cm’ » Maximum Applied Pressure : 10 kgf/cm’ » Holizontal installation (Adjusting stem points down) is obligatory Part Name Pressure Gauge Material Stainless Steel Upper Cover Sealing Spacer Main Body EPDM/ Viton Lower Cover Fixed Bolt Spring Steel Adjusting Stem Thread / Flange Type ©Thread type does not have Part No. 10. Flow Chart of Direct-activated Pressure Reducing Valve kgffem® Setting Outlet Pressure Flow rate-Water
Open the catalog to page 1All Elite Line Industrial Corp. catalogs and technical brochures
Float Valve Switch1 Page
HRT1 Page
CHF2 Pages
ATR1 Page
FVT1 Page
DTE1 Page
RPF1 Page
DTR1 Page
DTF1 Page
RAF1 Page
AXT1 Page
AIT1 Page
RLT1 Page
HSU1 Page
HSK1 Page
HST1 Page
HSY1 Page
HSR1 Page
HSD1 Page
HSL1 Page
HSM1 Page
HWD1 Page
HAG1 Page
HRA1 Page
HHY1 Page
HTD1 Page
HBS1 Page
HCV-350GG1 Page
HCV-300FF1 Page
HGO-200GG1 Page
HGO-300FF1 Page
HGN-300FF1 Page
HBF-300W1 Page
HBF-300G1 Page
UL-BFR1 Page
BFL-F1 Page
BFE1 Page
BFE2 Pages
BTS / BFS2 Pages
BTL / BFL2 Pages
BTR/BFR2 Pages
BGR1 Page
RS2 Pages
RDST1 Page
RDT1 Page
Pressure Relief valve1 Page
Pressure Reducing Valve1 Page
Float valve1 Page
Pump control valve2 Pages
Archived catalogs
SOLENOID CONTROL VALVE1 Page
- Elite Line manual valve
- Elite Line stainless steel valve
- Elite Line control valve
- Elite Line water valve
- Ball valve
- Elite Line threaded valve
- Electrically operated valve
- Elite Line flange valve
- Elite Line regulating valve
- On/off valve
- Flap valve
- Check valve
- Lever valve
- Electric valve
- ISO valve
- 2-way solenoid valve
- NC solenoid valve
- Elite Line pressure regulator
- Gas valve