MULTI-FUNCTION AUTO-CONTROL VALVE » Controller is fixed directly and designed of non-controller conduit. It reduces the damage of the controller conduit while transporting the equipment. > Controller is designed to be quickly screw fastened, enabling fast and easy installation. » The valve body can match with all types of controller without technical conversion, and all kinds of control valves can be formed. » Cylinder design is adopted for the valve body structure, making the valve applicable to low and high pressure in both vertical and horizontal positions. > Straight flow path is designed inside valve body. The large flow can reduce the malfunctions caused by impure water and effectively decrease turbulence and related bad effects. » The valve body is shaped and formed as whole. Small volume, lightweight, and easy installation. Simple and elegant appearance. > Professional manufacturers, best quality, and reasonable price. Outlet guiding hole ? Z (Controller inlet hole) hole Pressure chamber Controller outlet Cylinder bolt O-ring Cylinder Spring U-ring Piston Seat Shaft Inlet guiding hole » Patent Number 1. Applied conditions: Fluid & Air 2. Applied temperature: -15° ~ 80°C 3.Connection ends: Available for all international standards 4. Materials of valve body: Cast Iron, Ductile Iron, Bronze & Stainless Steel The valve body of main valve becomes functional by an inlet-guiding hole. This hole transfers pressure to pressure chamber. When enough pressure accumulates in the pressure chamber, it generates pushing force that makes the piston close to valve seat and generates the closing motion. There is another outlet guiding hole inside the pressure chamber. When the hole is open, pressure in pressure chamber dissipates and valve pate is pushed open by incoming water pressure. Working Pressure Cast [ron Cast Iron Test Pressure Cast Iron

> Solenoid control valve is a kind of isolation valve, which can substitute traditional gate valves, ball valves and butterfly valves. The gate functioning is easily controlled by electrical power. The valve can be installed in fire control facility, water supply, or distant location where it's difficult to control the gate opening. The controller is Interchangeable between manual and solenoid control. Ball valve must be closed when the set is controlled Specification of Solenoid Control Switch » Working Voltage : DC12V, DC24V, AC110V/220V, 50/60Hz » Electrifying Time Range : 1 year continuously...