THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES
5Pages

{{requestButtons}}

Catalog excerpts

THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES - 1

CATALOGO PRODOTTI RS232, RS485, USB, remote panel LCD, with SNMP software. TPH IGBT series represents the last transformer-less double conversion (VFI-SS111) power protection technology designed to protect a wide area of critical applications. For technology, performances (Eco Mode selectable from the panel), LCD display for alarms, measurements and historical events, 2 serial interface, RS232 and dry contacts, the series TPH IGBT is the perfect solution for powering all the sensitive electronics and security devices such as electro, data centers and telecommunications, industrial processes and systems of centralized power as required by EN 50171. All UPS TPH IGBT series can mount the main systems of communication interface such as dry contact interface, second Input power factor 0.99 at full load Output power factor 0.9 Input current distortion THiD ≤ 3% High efficiency up to 98% OFFLINE mode Parallelable up till 8 units (as option) Parallel configurations with central static switch IGBT inverter with transfomer Filtered, stabilized and regulated sine wave supply Wide input voltage window and input frequency window, the battery usage is minimized Zero transfer time Superior overload capability Battery monitoring and temperature dependent charging function as option LCD display for measurements, alarms and power history Back feed protection Device to avoid a complete battery discharge Cold start from battery as option Emergency line transformer as option ON LINE – OFF LINE working settable RS232 and standard dry contact, USB, RS485 and SNMP as option LCD remote panel as option Stabilizer function Static frequency converter function Emergency Power Off.

Open the catalog to page 1
THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES - 2

CATALOGO PRODOTTI The backup series is composed by: Rectifier, Inverter with transformer, Static Switch, manual by-pass and Battery. The Rectifier-Inverter line normally feeds the users, and the Battery is kept charged by the If a black out occurs, the Battery supplies power energy to users always through the Inverter. When the blackout is over, the Rectifier provides for Battery charge. If a short circuit or an overload occurs to the users, the Static By-pass switches the load over the emergency line. When the fault is over, the Inverter feeds users. The mimic diagram serves to indicate...

Open the catalog to page 2
THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES - 3

CATALOGO PRODOTTI UPS TRIFASE 100 ÷ 800kVA The emergency stop port is located at the front of the UPS TPH IGBT module. In order to allow removal, maintenance or testing of any remote emergency stop facility without disturbing the normal operation of the UPS, it is recommended that a terminal block, with linking facilities, be installed between the UPS and the stop button. 1. Use a screened cable with 1 pair (section of wire 0.6mm2) and maximum length of 100m. 2. Connect the cable as shown in figure. The TPH KING UPS may be paralleled for power capacity or for redundancy up to 20 units to...

Open the catalog to page 3
THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES - 4

CATALOGO PRODOTTI Model Rated power kVA/kW Voltage tolerance Input Power Factor Frequency tolerance Current distortion THDI Inrush current BATTERY Type Max current @ 80% load Nominal voltage EFFICIENCY ON LINE mode OFF LINE mode MISCELLANEOUS Relative humidity Operating temperature Noise level 1.5mt Interfaces Colour Dimensions w/o battery Net weight w/o battery Protection degree STANDARDS Safety EMC Performance INPUT Nominal voltage OUTPUT Voltage Voltage tolerance Voltage distortion Frequency Frequency stability Waveform Transfer time Power factor Overload at pf 0.8 380 - 400 - 415V 3Ph+N...

Open the catalog to page 4
THREE PHASE ON-LINE UPS TPH IGBT 100kVA ÷ 800KVA SERIES - 5

CATALOGO PRODODOTTI Model Rated power kVA/kW INPUT Nominal voltage Voltage tolerance Input Power Factor Frequency tolerance Current distortion THDI Inrush current OUTPUT Voltage Voltage tolerance Voltage distortion Frequency Frequency stability Waveform Transfer time Power factor Overload at pf 0.8 BATTERY Type Max current @ 80% load Nominal voltage EFFICIENCY ON LINE mode OFF LINE mode MISCELLANEOUS Relative humidity Operating temperature Noise level 1.5mt Interfaces Colour Dimensions w/o battery Net weight w/o battery Protection degree STANDARDS Safety EMC Performance EN 62040-1-1, EN...

Open the catalog to page 5

All ELIT catalogs and technical brochures

  1. ELIGHT series

    10 Pages

  2. FC series

    4 Pages

  3. NS series

    5 Pages

  4. SR series

    4 Pages