SINGLE PHASE ON-LINE UPS NS 5KVA ÷ 12KVA SERIES
5Pages

CATALOGO PRODOTTI CONVERTITORI STATICI d'ENERGIA ELETTRICA UMIHTERRLIPTIBLE POWER SUPPLY The NS series on line double conversion UPS with full time Digital Signal Processor control technology is the perfect solution for mission critical users who demand high reliability, availability and performance from a UPS. Input power factor correction, high efficiency and parallel redundant capability (N+X) provide a superior level of power quality for sensitive electronic equipment and computers loads. The backup series is composed by: Rectifier, Inverter, Static Switch, manual by-pass and The Rectifier-Inverter line normally feeds the users, and the Battery is kept charged by the If a black out occurs, the Battery supplies power energy to users always through the Inverter. When the blackout is over, the Rectifier provides for Battery charge. If a short circuit or an overload occurs to the users, the Static By-pass switches the load over the emergency line. When the fault is over, the Inverter feeds users. • Simple Parallel installation N+X • Full time Digital Signal Processor Control • Filtered, stabilized and regulated sine wave supply • High input power factor and low current ■ Wide input voltage and frequency range, minimizing the battery usage • Zero transfer time • Add matching battery cabinets and extend the backup time up to several hours. With its isolation conversion technology plus precision control, the optional charger can be installed in parallel up to 4 units • Superior overload capability • High battery reliability (battery test, • LCD display provides real time status and parameter readings • Advanced Battery Discharge Management to prevent the deep discharge of the batteries during a power failure • ON LINE - OFF LINE mode settable • Optional galvanic isolation transformer • Optional dual input loops • Personalizing 60Hz output converter

CONVERTITORI STATICI d'ENERGIA ELETTRICA CATALOGO PRODOTTI CONTROL PANEL The front display panel provides all major systems parameters and operational status of the UPS that include full diagnostics for simple, easy servicing. The NS series UPS with DSP control, systematically checks each component and displays the result using on LCD display. This feature allows service technicians the ability to pinpoint and repair the UPS very N+X POWER SCALABLE PARALLEL capacity or for redundancy up to 4 units to increase the power capacity or configuring a parallel redundant UPS system. The standard...

CATALOGO PRODOTTI SINGLE PHASE UPS Standard serial RS 232 The smart port is an intelligent RS232 serial port that allows the UPS to a computer. The connector is a standard D-Type, 9 pin, female. The software optionally allows the computer to monitor the mains voltage and the UPS status continuously. Gauges, Digital Table, Block Diagram and Graph Chart as well as remote monitoring of the UPS through Intranet or Internet. The software is compatible with many operating systems such as Windows 98, 2000, XP, Vista and Windows 7 For other applications like Novell, NetWare, Unix, Linux, please...

CATALOGO PRODOTTI SINGLE PHASE UPS - Optional External 1000W Charger. Its independent electronic control allows to the device to work in parallel up to 4 units. The external battery charger is foreseen to be placed on back of the cabinet. - External Bypass Switch Box Series. Beyond to the standard manual by-pass fitted in each UPS, the external maintenance bypass and power output distribution switch allows you to manually transfer the connected equipment to utility power via a maintenance bypass switch and vice versa. It is available till 400 A and it is suitable for single UPS and for a...

CATALOGO PRODOTTI INPUT Nominal Voltage Frequency Power factor Distortione (THiD) 160 ÷ 280Vac single phase 45 ÷ 65Hz 0.99 at full load < 6% OUPUT Voltage Frequency Frequency tolerance Waveform Distortion (THD) Transfer time Crest factor DC start Overload BATTERY Type Recharge time Nominal voltage Standard back up time 220/230/240V ± 2% single phase, adjustable 50/60Hz auto sensing ± 0.2% free running; regulation ±1Hz or ±3Hz Sinusoidal < 3% 0 ms. 3:1 yes 150% for 3’’ 150% for 1’ Maintenance free VRLA 4h at 90% 240Vdc 15’ PROTECTION Short circuit Overheat Leakage current Switch off...