CATALOGO PRODOTTI RACK 19” SINGLE PHASE UPS The SR series on line double conversion UPS with full time Digital Signal Processor control technology is the perfect solution for mission critical users who demand high reliability, availability and performance from a UPS. Input power factor correction, high efficiency and parallel redundant capability (N+X) provide a superior level of power quality for sensitive electronic equipment and computers loads. PRINCIPLES OF WORKING The backup series is composed by: Rectifier, Inverter, Static Switch, manual by-pass and Battery. The Rectifier-Inverter line normally feeds the users, and the Battery is kept charged by the Rectifier. If a black out occurs, the Battery supplies power energy to users always through the Inverter. When the blackout is over, the Rectifier provides for Battery charge. If a short circuit or an overload occurs to the users, the Static By-pass switches the load over the emergency line. When the fault is over, the Inverter feeds users. Simple Parallel installation N+X Full time Digital Signal Processor Control Filtered, stabilized and regulated sine wave supply High input power factor and low current THD Wide input voltage and frequency range, minimizing the battery usage Zero transfer time Add matching battery cabinets and extend the backup time up to several hours. With its isolation conversion technology plus precision control, the optional charger can be installed in parallel up to 4 units Superior overload capability High battery reliability (battery test, manual and automatic) LCD display provides real time status and parameter readings Advanced Battery Discharge Management to prevent the deep discharge of the batteries during a power failure ON LINE – OFF LINE mode settable Optional galvanic isolation transformer RS232 standard, dry contact, USB, RS485 & SNMP as option Optional dual input loops Personalizing 60Hz output converter Emergency Power Off

CONVERTITOHI STATIC) d'ENERGIA ELETTRICA CATALOGO PRODOTTI RACK 19" SINGLE PHASE UPS CONTROL PANEL The front display panel provides all major systems parameters and operational status of the UPS that include full diagnostics for simple, easy servicing. The SR series UPS with DSP control, systematically checks each component and displays the result using on LCD display. This feature allows service technicians the ability to pinpoint and repair the UPS very capacity or for redundancy up to 4 units to increase the power capacity or configuring a parallel redundant UPS system. Control Keypads: Scroll...

CATALOGO PRODOTTI RACK 19” SINGLE PHASE UPS INTERFACES In additional to the standard RS232 with software, the SPH Series UPS also provides 2 additional customer options communication slots. The SR series UPS is provided with monitoring and shutdown software. The monitoring software provides real-time UPS status display via easy-to-read Meter and Gauges, Digital Table, Block Diagram and Graph Chart as well as remote monitoring of the UPS through Intranet or Internet. The software is compatible with many operating systems such as Windows 98, 2000, XP, Vista and Windows 7 For other applications...

CATALOGO PRODOTTI RACK 19” SINGLE PHASE UPS - Optional External 1000W Charger. Its independent electronic control allows to the device to work in parallel up to 4 units. The external battery charger is foreseen to be placed on back of the cabinet. - Rail kit to support UPS in rack 19” cabinet. REAR PANEL EXPLANATION - External Bypass Switch Box Series. Beyond to the standard manual by-pass fitted in each UPS, the external maintenance bypass and power output distribution switch allows you to manually transfer the connected equipment to utility power via a maintenance bypass switch and vice versa....

CATALOGO PRODOTTI RACK 19” SINGLE PHASE UPS INPUT Nominal Voltage Voltage tolerance Power factor Frequency Frequency tolerance Distortione (THiD) OUPUT Voltage Frequency Frequency stability Waveform Distortion (THD) Transfer time Crest factor DC start Overload BATTERY Type Recharge time Nominal voltage Charging current Supplementary charger Battery Test EFFICIENCY ON LINE mode OFF LINE mode 220/230/240Vac 2w 160 ÷280Vac single phase Up to 0.99 at full linear load 50/60Hz 45 ÷ 65Hz < 6% Maintenance free VRLA 5h at 90% 240Vdc 1.8 A 2.1 A 2.1 A Optional 4.5 A isolated charger Automatic and periodically...