WELD-IN TYPE THERMOWELL E TW/WI Weld-in Type Thermowell GENERAL Thermowells are protecting tubes which are manufactured by solid bar stock or pipe material to protect thermocouples, resistance thermometers and other temperature sensors. Especially, they are used widely in critical applications where pressure, viscosity, fluid velocity, chemical and mechanical corrosive abrasive materials are present individually or in combination. A properly selected thermowell will protect the temperature sensor from possible damage resulting from these process variables. A thermowell permits removal of the temperature sensors for replacement, repair or testing without effecting the process or system. ELIMKO THERMOWELLS Elimko thermowell types in process aplications; TW/T : Threaded Type TW/F : Flanged Type TW/W : Weld-in Socketed Type TW/WI : Weld-in Type 141 TW/V : Vanstone Flanged Type

STANDART FEATURES Bar Materials Bore Diameter Note 1: Elimko Thermowells can be produced additionally to the standart bore diameters, it is also possible to produce bore diameters from 4 mm to 22 mm, up to maximum 1200 mm length. Note 2 : The above mentioned solid bar stock materials are our standart types. Special materials could be supplied upon receipt of satisfactory orders. Others : Haynes 25, Carpenter, 20 CB, Nichrome, HCF, 50Co-30Cr, Monel 400, Titanium, Tantalum, X-750, B, C276, X. Note 3 : Satellite coating can be produced against abrassion. Tests Thermowells can be tested after produced...

Head Length Insertion Length Stem Length Type Diameter Weld-in Type Thermowell Weld-in Type Bore Diameter Production Type Production Standard Welding Diameter Well Material Type Thickness Instrument Connection Production Standard Production Type Bore Diameter Welding Diameter Head Length Insertion Length Stem Length Type Diameter Welding Diameter Well Material Type Thickness Instrument Connection Screw Plug and Chain Pressure Test Material Certificate * Please give the Process Connection (P), Instrument Connection (IC), Head Length (H), Type Length (L), Stem/Root Diameter (Q,QT, QSt), Type Diameter...

EXAMPLES TW/WI-B7-SB-M-P02-IC21-H76-U 125-A 195-V02-Tth01- Wm03-O01-O02 Well Type (TW) = TW/WI Weld-in Type Thermowell Bore Diameter (B) = 7 mm, Production Type (SB) = Solid Bar Drilled, Production Standard (M) = Metric, Welding Diameter (P02) = 30h7, Instrument Connection (IC21) = 1/2” NPT, Head Lenght (H) = 76 mm, Insertion Length (U) = 125 mm, Stem Length (A) = 195 mm, Type Diameter (V02) = 16 mm, Type Thickness (Tth01) = 6 mm, Well Material (Wm03) = 316 L Options (001) = Screw Plug and Chain / (002) = Tag No Written on SS Plate HOW TO ORDER Select one of the types of TW/T, TW/W, TW/W, TW/V,...