VANSTONE FLANGED TYPE THERMOWELLS E TW/VS Vanstone Flanged Type Straight Thermowell TW/VT Vanstone Flanged Type Tapered Thermowell TW/VSt Vanstone Flanged Type Stepped Thermowell GENERAL Thermowells are protecting tubes which are manufactured by solid bar stock or pipe material to protect thermocouples, resistance thermometers and other temperature sensors. Especially, they are used widely in critical applications where pressure, viscosity, fluid velocity, chemical and mechanical corrosive abrasive materials are present individually or in combination. A properly selected thermowell will protect the temperature sensor from possible damage resulting from these process variables. A thermowell permits removal of the temperature sensors for replacement, repair or testing without effecting the process or system. ELIMKO THERMOWELLS Elimko thermowell types in process aplications; TW/T : Threaded Type TW/F : Flanged Type TW/W : Weld-in Socketed Type TW/WI : Weld-in Type 133 TW/V : Vanstone Flanged Type

STANDART FEATURES Bar Materials Bore Diameter Note 1 : Elimko Thermowells can be produced additionally to the standart bore diameters, it is also possible to produce bore diameters from 4 mm to 22 mm, up to maximum 1200 mm length. Note 2 : The above mentioned solid bar stock materials are our standart types. Special materials could be supplied upon receipt of satisfactory orders. Others : Haynes 25, Carpenter, 20 CB, Nichrome, HCF, 50Co-30Cr, Monel 400, Titanium, Tantalum, X-750, B, C276, X. Note 3 : Satellite coating can be produced against abrassion. Tests Thermowells can be tested after produced...

Instrument Connection Head Length Head Diameter Insertion Length Type Lenght Stem Length Stem/Root Diameter Type Diameter Vanstone Flanged Type Thermowells Straight Type Tapered Type Stepped Type Bore Diameter Production Type Production Standard Head Diameter Process Connection Insertion Length Type Lenght Stem Length For TW/VS Stem/Root Diameter Sealing Face Diameter Process Connection Flange Size Flange Rate Flange Material Well Material Type Thickness Flange Size Flange Thickness Sealing Face Diameter Bore Diameter Flange Rate Production Standard Production Type Flange Thickness Instrument...

For TW/VT Stem/Root Diameter For TW/VSt Stem/Root Diameter Type Thickness Flange Material Well Material Screw Plug and Chain Pressure Test Material Certificate For TW/VS Type Diameter For TW/VT Type Diameter For TW/VSt Type Diameter EXAMPLES TW/VSt-B7-SB-M-FsM02-FrM02-Sfd01-Fth01-IC21-H01-P01-U480-L01-A560-QSt01-VSt01-Tht01-Wm03Fm03-O01-O02 Well Type (TW) = TW/VSt Vanstone Flanged Type Tapered Thermowell, Bore Diameter (B) = 7 mm, Production Type (SB) = Solid Bar Drilled, Production Standard (M) = Metric, Flange Size (FsM02) = DN40, Flange Rate (FrM02) = PN25, Sealing Face Diameter (Sfd01) =...