THREADED TYPE THERMOWELLS E TW/TS Threaded Type Straight Thermowell TW/TT Threaded Type Tapered Thermowell TW/TSt Threaded Type Stepped Thermowell GENERAL Thermowells are protecting tubes which are manufactured by solid bar stock or pipe material to protect thermocouples, resistance thermometers and other temperature sensors. Especially, they are used widely in critical applications where pressure, viscosity, fluid velocity, chemical and mechanical corrosive abrasive materials are present individually or in combination. A properly selected thermowell will protect the temperature sensor from possible damage resulting from these process variables. A thermowell permits removal of the temperature sensors for replacement, repair or testing without effecting the process or system. ELIMKO THERMOWELLS Elimko thermowell types in process aplications; TW/T : Threaded Type TW/F : Flanged Type TW/W : Weld-in Socketed Type TW/WI : Weld-in Type 125 TW/V : Vanstone Flanged Type

STANDART FEATURES Bar Materials Bore Diameter Note 1: Elimko Thermowells can be produced additionally to the standart bore diameters, it is also possible to produce bore diameters from 4 mm to 22 mm, up to maximum 1200 mm length. Note 2 : The above mentioned solid bar stock materials are our standart types. Special materials could be supplied upon receipt of satisfactory orders. Others : Haynes 25, Carpenter, 20 CB, Nichrome, HCF, 50Co-30Cr, Monel 400, Titanium, Tantalum, X-750, B, C276, X. Note 3 : Satellite coating can be produced against abrassion. Tests Thermowells can be tested after produced...

Threaded Type Thermowells Straight Type Tapered Type Stepped Type Insertion Length Type Lenght Stem Length Stem/Root Diameter Type Diameter Head Length (No Extention) Bore Diameter Well Material Type Thickness Process Connection Production Type Production Standard Head Length Instrument Connection Bore Diameter Process Connection Production Standard Production Type Process Connection thread length’s 7/8 “ (22 mm) for P21 Process Connection Insertion Length For TW/TSt Type Lenght For TW/TS Stem/Root Diameter For TW/TT Stem/Root Diameter Process Connection For TW/TSt Stem/Root Diameter Stem Length...

For TW/TS Type Diameter Process Connection Type Thickness Screw Plug and Chain Pressure Test Well Material Material Certificate For TW/TT Type Diameter Process Connection For TW/TSt Type Diameter EXAMPLES TW/TT- B0.260”-SB-I-P22-IC21-H21-U10 1/2”-L00-A12”-QT22-VT22-Tth21-Wm03-O01-O02 Well Type (TW) = TW/TT Threaded Type Tapered Thermowell, Bore Diameter (B) = 0,260”, Production Type (SB) = Solid Bar Drilled, Production Standard (I)= Non-Metric, Process Connection (P22) = 3/4” NPT, Instrument Connection (IC21) = 1/2” NPT, Head Lenght (H21) = 1 3/4”, Insertion Length (U) = 10 1/2”, Type Lenght...