MINERAL INSULATED THERMOCOUPLES Elimko Mineral Insulated Thermocouple Coding Drawing Number 1 Element Number 2 Element Type 3 Protective Sheath Diameter 4 Protecting tube 5 Immersion Length * Cable Length * Cable Type * Socket * Thread * Head * Element * Converter * Surface Coating * Flange * Thermowell * Certificate * IN = Manufacturing Number MI01 - 1 K 60 I - 50 - K10 - SS - ME - G1 - Ex - TZ - Tr - TH - F - W - S Drawing Nr.1 2 STANDARD CODE ADDITIONS TO STANDARD CODE Note: IN = Manufacturing number is given by Elimko for special case.

STANDARD CODE It is coded with digits and letters containing the drawing number and 5 separate pieces of information. ADDITIONS TO STANDARD CODE In addition to the technical specifications contained in the standard codes, the required features are listed in the “ ADDITIONS TO STANDARD CODE". These features are given below. In this section only needed features are written. See examples. SPECIAL CASES Additional features which are not fully defined with "STANDARD CODE” and ‘’ ADDITIONS TO STANDARD CODE’ are coded with special drawing number. This code is expressed with IN=Manufacturing number....

* Element Type Grounded Ungrounded Hair Slot Needle Type Air Perforated YA Surface Angle Open Ended YU Surface Open Ended Surface V Resistant to vibration Surface Spherical Elimko converter installed Elimko insulated converter installed As to use Elimko converter Other brand converter to be installed As to use other brand converter Elimko or other brand converters can be installed in the thermocouple head. * Surface Coating Teflon coating Teflon hose Stellite coating The protecting tube can be coated with known materials. If coating exists coding is made according to its type. W Thermowell exits....