Same with the above Same with the above L1 Length selected in Code Elimko L Type Thermocouple Coding For code generation for L type thermocouple selection, the straight type thermocouple coding list is used Type L thermocouple drawing can be TC06 or TC07. As you can see in the drawing below, L1 size is Immersion length.In the L-type thermocouple code, the figure in height is L1. In standard types, L2 length is automatically determined when L1 is detected.Special requests must be specified separately. L2 is given to the side of the L1.

Elimko L Type Thermocouples The company’s policy is one of continuous product improvement. We reserve the right to modify the information contained herein without notice. 97 /elimkoltdsti /elimkoltdsti /elimkoltdsti

INSET AND THERMOCOUPLES WITH INSETS Elimko Inset Type and Inset Thermocouple Coding Straight type thermocouples coding table is applied exactly for the selection of the thermocouples of the inset type TC03, TC04 and TC30. For this type of thermocouples length is written in cm. Length for inset types are written in the code list in mm. Also the lengths to be installed inside the standard lengths are standard. EXAMPLE: TC05 - 1 J 1 P 06 - 315 / TC05 - 1 K 1 P 08 - 430 Elimko Inset Type and Inset Thermocouples

The company’s policy is one of continuous product improvement. We reserve the right to modify the information contained herein without notice. 99 /elimkoltdsti /elimkoltdsti /elimkoltdsti