FLANGED TYPE THERMOWELLS E TW/FS Flanged Type Straight Thermowell TW/FT Flanged Type Tapered Thermowell TW/FSt Flanged Type Stepped Thermowell GENERAL Thermowells are protecting tubes which are manufactured by solid bar stock or pipe material to protect thermocouples, resistance thermometers and other temperature sensors. Especially, they are used widely in critical applications where pressure, viscosity, fluid velocity, chemical and mechanical corrosive abrasive materials are present individually or in combination. A properly selected thermowell will protect the temperature sensor from possible damage resulting from these process variables. A thermowell permits removal of the temperature sensors for replacement, repair or testing without effecting the process or system. ELIMKO THERMOWELLS Elimko thermowell types in process aplications; TW/T : Threaded Type TW/F : Flanged Type TW/W : Weld-in Socketed Type TW/WI : Weld-in Type 137 TW/V : Vanstone Flanged Type

STANDART FEATURES Bar Materials Bore Diameter Note 1: Elimko Thermowells can be produced additionally to the standart bore diameters, it is also possible to produce bore diameters from 4 mm to 22 mm, up to maximum 1200 mm length. Note 2 : The above mentioned solid bar stock materials are our standart types. Special materials could be supplied upon receipt of satisfactory orders. Others : Haynes 25, Carpenter, 20 CB, Nichrome, HCF, 50Co-30Cr, Monel 400, Titanium, Tantalum, X-750, B, C276, X. Note 3 : Satellite coating can be produced against abrassion. Tests Thermowells can be tested after produced...

Flanged Type Thermowells Straight Type Tapered Type Stepped Type Bore Diameter Production Type Type Diameter Stem/Root Diameter Head Diameter Flange Type Insertion Length Production Standard Raised Face Flat Face Type Lenght Ring Type Joint Threaded Raised Face Flange Flange Welding Type Full Penetration Partial Penetration Threaded & Welded Without Welding Stem Length Instrument Connection For TW/FS Stem/Root Diameter Head Length Flange Rate Flange Material Well Material Type Thickness Stem Length Insertion Length Head Diameter Head Length Instrument Connection Flange Welding Type Flange Rate...

For TW/FT Stem/Root Diameter For TW/FSt Stem/Root Diameter Type Thickness Flange Material Well Material For TW/FS Type Diameter For TW/FT Type Diameter Screw Plug and Chain Pressure Test Material Certificate For TW/FSt Type Diameter EXAMPLES TW/FS-B18-P-M-FsM02-FrM04-THR-Fwt00-IC01-H110-P01-U120-L00-A130-Q02-V02-Tth02-Wm18-Fm18O01-O02-O03 Well Type (TW) = TW/FS Flanged Type Straight Thermowell, Bore Diameter (B) = 18 mm, Production Type (P) = Pipe, Production Standard (M) = Metric, Flange Size (FsM02) = DN40, Flange Rate (FrM04) = PN100, Flange Type (THR) = Threaded Raised Face Flange, Flange...