E-48 Series controllers are designed using new generation micro-controllers for on/off and PID control. The unit has dimensions of 48x48 mm, conforming IEC/TR 60668. E-48 Series have a 2x4 digits LED display range between -1999 and +9999, configurable universal inputs (T/C, R/T, mV, mA) with 16 bit resolution, low calibration drifts with environmental conditions. E-48 Series controllers have easy programming facilities to provide on/off and PID forms and are used in every field of industry for measurement and control of temperature, pressure, level, current, voltage, resistance and other process parameters in industries such as iron & steel, cement, plastic, chemistry, metallurgy, petrochemical plants, refineries, ceramic, glass and others. C€ • This controller complies with the European Low Voltage Directive 2006/95/EC, by the application of safety standard TS EN 61010-1. (Pollution degree 2) • This controller complies with the EMC Directive 2004/108/ EC by the application of EMC standard TS EN 61326. DIN 43710 standards, others conform to IEC 60584-1. E-48 Series instruments are general purpose and can be configured according to the applicati

* (EU) °C or °F for the thermocouples and resistance thermometer inputs, for the linear inputs, same with the unit which is controlled. Decimal point can be determined by parameter of dP. • Programmable universal inputs i i i i • Programmable universal outputs ; ; i i • Transmitter power supply 24 V DC : : : : Relay Outputs : * RS485 output is not available if current output is desired. ** If 3rd relay output is requested, Analog output (X) and Communication (Y) should be selected as None (0). /elimkoltdsti I /elimkoltdsti I /elimkoltdsti