BAYONET TYPE THERMOCOUPLES Elimko Bayonet Type Thermocouples Coding and Examples Bayonet thermocouples are coded as follows. Drawing Number 1- Element Number 2- Element Type 3- Pipe Type 4- Pipe Diameter 5- Immersion Length 6- Cable Length 7- Cable Type 8- Element Type * Thread * IN=Manufacturing Number STANDARD CODE Note: IN = Manufacturing number is given by Elimko for special case. ADDITIONS TO STANDARD CODE

STANDARD CODE It is coded with digits and letters containing the drawing number and 8 separate pieces of information. ADDITIONS TO STANDARD CODE In addition to the technical specifications contained in the standard codes, the required features are listed in the " ADDITIONS TO STANDARD CODE". These features are given below. In this section only needed features are written. See examples. SPECIAL CASES Additional features which are not fully defined with "STANDARD CODE”and’ADDITIONS TO STANDARD CODE’are coded with special drawing number. This code is expressed with IN=Manufacturing number. Drawing...

EXAMPLES BT01-1JP06-3-K10-CCB-T • Suitable with BT01 drawing • Single element • Fe-Const J thermocouple • P Stainless • 6 mm diameter • L1 length 3cm • 1m cabled • Grounded mounting • Standard thread M12x1.5 BT03-2KB08-5-K25-SS-TZ-M12x1.75 • Suitable with BT03 drawing • Double element • NiCr-Ni K thermocouple • B Brass • 8 mm diameter • L1 length 5cm • 2.5 m cabled • Floating mounting • Thread M12x1.75 Elimko Bayonet Type Thermocouples The company’s policy is one of continuous product improvement. We reserve the right to modify the information contained herein without notice. 107