SLC Series - Low-Cost Motor Controller
1Pages

{{requestButtons}}

Catalog excerpts

SLC Series - Low-Cost Motor Controller - 1

Possibility of customizing the firmware for large quantities • Flexible and scalable, designed to control from 12V to 96V Brushless PMDC and PMSM, Brushed and AC Motors. • Supported feedback types: Hall Sensors, SinCos, Incremental Encoder, Fa-Coder, Absolute Encoder, SSI/BiSS Communication Protocol, Resolver • Advanced algorithms for predictive speed and torque control and telemetry of the Internal functions • Communication protocol standard: RS232 for Telemetry and Parameterization • Communication protocol1optional: CANopen®: CiA® DS301 and CiA® DSP402 (Profile position mode, Profile velocity mode, Profile torque mode, Cyclic sync position mode, Homing mode) • Electromagnetic Holding Brake Output with DPR System (Dynamic Power Reduction) • European Conformity C€, designed in accordance with EN 60950-1 safety requirements and EMC standards. Specification: & Four Quadrant Regenerative Operation & Sinusoidal or Trapezoidal Commutation Methods & Fully Configurable and Programmable & Programmable Emergency Ramp Input & Single STO input forces the bridge into High Z & Auxiliary Input Supply Voltage 9^32V not mandatory Main Features: 4D 6 x Programmable Single Ended Digital Inputs » 2 x 2A Programmable Digital Outputs C4 1 x 2A Brake Control Output ^ 1 x 0^5V 12-bit Analog Input C4 1 x 5V - 50mA Throttle Output • 12V - 24V - 36 - 48V - 72V - 96V versions * The value of the nominal continuous RMS phase current (60 min) is ensured with an appropriate heat sink. 1 Elife International S.r.l. is a Member of CiA® - CAN in Automation

Open the catalog to page 1

All Elife International S.r.l. catalogs and technical brochures

  1. R-IVR-400A

    1 Pages

  2. R-IVR-180A

    1 Pages

  3. R-IVR-90A

    1 Pages

  4. R-12V-400A

    1 Pages

  5. R-12V-180A

    1 Pages

  6. R-12V-90A

    1 Pages