KV Series - Very Compact Motor Controllers
1Pages

Elife-Drive KV Series from 12 to 768 V Nominal - from 125 to 350 Arms This technical review shows the main features and technical information of Elife-Drive KV Series. For further information about this series and to define an evaluation of your needs, please refer to our website to contact us. The main key features include: • Flexible and scalable, designed to control from 10V to 900V Brushless PMDC and PMSM, Brushed and AC Motors. • Supported feedback types (are all available in version X): Resolver, Absolute Encoder, SinCos, Hall Sensors, Incremental Encoder, Fa-Coder, SSI/BiSS Communication Protocol • Advanced algorithms for predictive speed and torque control and telemetry of the Internal functions • Communication protocol1 : CANopen® : CiA® DS301 and CiA® DSP402 - (EtherCAT on request) (Profile position mode, Profile velocity mode, Profile torque mode, Cyclic sync position mode, Homing mode) • Electromagnetic Holding Brake Output with DPR System (Dynamic Power Reduction) • European Conformity , designed in accordance with EN 60950-1 safety requirements and EMC standards. Specification: Four Quadrant Regenerative Operation Sinusoidal or Trapezoidal Commutation Methods Fully Configurable and Programmable Programmable Emergency Ramp Input Class 3 Safe Torque Off (STO) Input Auxiliary Supply Voltage 9÷32V IP 66 Metal Enclosure Main Features: 6 x Programmable Single Ended Digital Inputs 6 x Programmable Digital Outputs 1 x 2A Brake Control Output 1 x Programmable PVM Input 1 x Programmable ±10V 12-bit Analog Input 1 x Programmable 0÷10V 12-bit Analog Output 1 x 5V - 100mA Throttle Output Dimensions: without flying connector: 150x125x80 mm with 90° flying connector: 150x125x100 mm Weight: with 90° flying connector: 1.60 kg (56,44 oz) Table 1: Elife-Drive KV Series is available for different Supply Voltages and Phase Currents Nominal Voltage Supply - Voltage Range - Max Motor Power Phase Current * No Peak * The value of the maximum continuous (60 min) RMS phase current is ensured with an appropriate heat sink. International S.r.l. is a Member of CiA® - CAN in Automa