Catalogs >
Elife International S.r.l. >
Diagnostic Display - Battery and Drive Controller

Diagnostic Display - Battery and Drive Controller
1Pages

Catalog excerpts

Diagnostic Display - Battery and Drive Controller - 1

This technical review shows the main features and technical information of Elife Diagnostic Display. For further information about this model and its applications, or to define an evaluation of your needs, please refer to our website to contact us. Specification: & Display Battery Charge Status & Display Elife-Drive Fault Codes & Digital hour 4-digit counter & Maintenance Counter & CANopen® communication1 & 128x32 px Color LCD The main key features include: • Display Battery Charge Status and level indication refresh every 10 s. • It can be used with batteries from 24 up to 196 V. • Open drain lockout to prevent deep discharging of batteries. • Interface for one or two Elife-Drive motor controller through RS232 communication and display various fault and status codes. • GB back-lighting, it gets red for alarm display. • 128 x 32 pixel alphanumeric Liquid Crystal Display • Diagnostic Display works at temperature from -200C to +70 °C • IP66 environment frontal protection, IP20 rear protection • Housing and front part are made of ABS, hole 52mm. Diagnostic Display Table 1: Description of Elife Diagnostic Display. Diagnostic Display Low Cost li^e ftInternational Display Battery Charge Status: & Battery Discharge Prevention: & Battery Voltage: From 18 to 120 V CANopen® Communication: Maintenance Counter: Elife International S.r.l. is a Member of CiA® - CAN in Automation

Open the catalog to page 1