KEMTRON 400HD2™ Fluid Recycling System KEMTRON 400HD2™ Centrifugal Pumps Inset pump pockets with direct access to each pump for ease of operation and maintenance. Additives Hopper 3" solids hopper with Venturi nozzel. Elgin’s KEMTRON 400HD2 Packaged Fluid Recycling System comes standard with a dual-deck 4-panel linear motion shaker. Featuring (6) 4” hydrocyclones capable of providing 400 gpm fluid processing capabilities. Powered by a Tier III 60KW diesel generator package, hydrocyclone manifold, a personal restraint and deck access package, three dedicated centrifugal pumps, and a triple-axel trailer with a mechanical or hydraulic 4-point jacking system make this the perfect system for small and medium volume fluid systems. Recently, Elgin incorporated newly designed independent pump pockets allowing direct access to each pump for ease of operation and maintenance. With on-board lighting, Smart Panel control system, four high-pressure mud guns, Hyper-G Shaker design and a new ergonomic retractable ladder, the KEMTRON 400HD2 is the industry’s most advanced mud system for its size. The KEMTRON 400HD2 4-panel dual-deck shaker provides a total 38 sq. ft. of screen surface area with 2.0 hp vibrator motors. With a 2,350 gallon two-compartment tank, this unit can process fluid up to 400 gallons per minute (gpm) with a maximum attainable solids control cut of 30 microns. With all of these options, Elgin’s KEMTRON 400HD2 is an affordable, high performance fluid recycling system capable of managing high flow rates while maintaining a compact footprint where space constraints exist. Six 4” desilter hydrocyclones for secondary sand and silt removal. KEMTRON 400HD2™ System Features: • 2,350 gallon (8,895 liters) two-compartment holding tank. Linear Motion Shaker Double-deck, four panel linear motion shaker with 2.0 hp vibrator motors. Multifunctional Linear Motion Shaker with polyester powder-coated pretension screens. The bottom deck of the shaker acts as a primary scalper and the top deck as a fine solids screen – drying the fine particles from the desilter cones. • Six (6) 4" hydrocyclone desilters for secondary sand and silt removal. • Additives hopper with venturi nozzle to provide shear energy in preparing new fluid. • Two 15 hp centrifugal pumps with mechanical seal for transfer operation and mud mixing. One 20 hp centrifugal pump with mechanical seal for desilter operation. • Weatherproof NEMA 4X control panel and optional generator packages. • Special features such as rear discharge chute, dump valves and drain troughs, allow for working inline with narrow operations • Proprietary Smart Panel allows operators to run and monitor the reclaimer from a Smart Phone, Tablet or Laptop.

ELGIN SEPARATION SOLUTIONS KEMTRON 400HD2™ Fluid Recycling System Model Number: Trailer Mount Design Options (Upgrade Packages) Touch Screen Control Panel - Add a HMI touch screen interface with remote Wi-Fi technology for system operation. Add a Trailer Mounted System - Add a 21,000 lbs (13,607 kg) rated triple-axel trailer. Add a Generator Package - Add a 60 kW diesel generator to provide local electrical power for the shaker and all pumps with an on-board diesel tank. Sound attenuated generators also available. Add a Submersible Feed Pump - Add a 500 gpm (31.5 lps), 10 hp, submersible pump...