KEMTRON 100HD2 Packaged Mud System
2Pages

KEMTRON 100HD2™ Fluid Recycling System KEMTRON 100HD2™ Vibrator Motors Fitted with two 0.67 HP synchronized linear motion vibrator motors. Self-Priming Pumps Fitted with (2) Self- priming closed-coupled 3 x 2 pumps. The KEMTRON 100HD2 fluid recycling and mixing unit was designed to provide an economical alternative to traditional fluid mixing and vacuum trucks. Environmental pressures, dumping costs and down time while waiting on fresh water or vacuum truck turnaround, have made the KEMTRON 100HD2 an invaluable asset. Fluid is pumped, using a KEMTRON 100HD2-T submersible pump, directly to the bottom deck of the double deck shaker, acting as a scalping cut The solids are discarded off the rear and the fluid passes thru the screen into the first compartment of the tank. The desilter pump transfers fluid from the first tank compartment into the hydrocyclone manifold. The desilter underflow goes over the top deck of the shaker where the solids are discarded off the rear and fluid is collected in first compartment of the tank. The clean fluid (overflow) flows into a splitter box capable of directing the fluid into the clean tank or back to the dirty tank for continous recycling. The transfer pump delivers the fluid from the clean tank back to the rig. Two 4” hydro-cyclones, with screen savers and valve isolation. All pumps and shaker have manual start and stop buttons on the control panel. The mud gun operates from the desilter pump. The KEMTRON 100HD2 comes standard with a 500 gallon (1,880 liters) tank and allows rig operators to prepare up to 500 gallons of fluid. KEMTRON 100HD2™ Features • 65 to 130 gpm (4.1 to 8.0 lps) flow capacity. • 500 gallon (1,880 liters) tank capacity. Control Panel Fully integrated controls capable of operating a remote feed pump. • One (1) or two (2) 4” desilter hydrocyclone manifold for secondary sand and silt removal with dedicated isolation valves. • Remote control pendant with 100 foot (30 meter) cable for operator control of submersible pump and transfer operation. • Two 7.5 hp self-priming pumps for mud gun/hopper, desilter and transfer operation. • Low level tank sensor to protect pumps from running dry (option upgrade). • Special features such as rear discharge, chute, dump valves and drain troughs, allow for easy solids / liquid disposal.

ELGINSEPARATION SOLUTIONS — KEMTRON I00HD2™ Fluid Recycling System Shale Shakers Elgin manufactures high-G linear & balanced elliptical motion shakers. Management Design To maximize space, Elgin’s packaged treatment systems utilize hydrocyclone technology to ensure a small footprint. Decanter Centrifuge Add a centrifuge to your solids control system for further removal of ultr-fine solids. Options (Upgrade Packages) Add High / Low Level Tank Alarm Sensors - provides audible indications of when tank levels are too high or too low relative to tank volume or pump suction. Add a ‘Car Hauler'...