Catalogs >
ELESA >
VCT.

VCT.
5Pages

Catalog excerpts

Lobe knobs INOX STAINLESS STEEL MATERIAL High-resilience polypropylene based (PP) technopolymer, black colour, matte finish. VCT.25: glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. BOSS CAP -- CA.VCT: polypropylene-based (PP) technopolymer, in Elecolors colours, matte finish, press-fit assembly. Supplied. Not available for VCT.25. Available also as accessory sold separately (see table).-STANDARD EXECUTIONS - VCT-A: black-oxide steel boss, plain blind hole. - VCT-B: brass boss, threaded blind hole (VCT.25 - 95) or threaded pass-through hole (VCT.32 - 40 - 50 - 63 - 74 - 84). - VCT-AZ: zinc-plated steel boss, threaded pass-through hole. - VCT-SST: AISI 303 stainless steel boss, threaded blind hole (VCT.25) or threaded pass-through hole (VCT.32 - 40 - 50 - 63 - 74 - 84). - VCT.FP: brass boss, threaded pass-through hole, without cap. - VCT-AZ-FP: zinc-plated steel boss, threaded pass-through hole, without cap. - VCT-SST-FP: AISI 303 stainless steel boss, threaded pass-through hole, without cap. - VCT-p: zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical data on page A-11). - VCT-SST-p: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical data on page A-11). ACCESSORIES ON REQUEST -- CA.VCT: polypropylene-based (PP) technopolymer boss cap, in Elecolors colours, matte finish, press-fit assembly, not available for VCT.25 (see table). For sufficient quantities, it can be supplied in other colours or with customised graphic symbols, marks or writings. * Complete with colour index (C9, ..., C17). * Complete with colour index, example: 69841-C2 VCT.32 A-6-C2 RAL9005 Clamping knobs Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos

Open the catalog to page 1

Lobe knobs * Complete with colour index, example: 69843-C2 VCT.32 B-M5-C2 RAL9005 VCT-B Code # "Max limit Tightening torque" means the max torque value at which the metal insert, in normal conditions of use, is perfectly and strongly anchored to the plastic material. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos. Clamping knobs

Open the catalog to page 2

Lobe knobs VCT-FP VCT-AZ-FP VCT-SST-FP VCT.FP Code VCT-AZ-FP Code Clamping knobs Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

Open the catalog to page 3

Lobe knobs * Complete with colour index, example: 69872-C2 VCT.32 p-M5x20-C2 RAL9005 # "Max limit Tightening torque" means the max torque value at which the metal insert, in normal conditions of use, is perfectly and strongly anchored to the plastic material. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos. Clamping knobs

Open the catalog to page 4

Lobe knobs VCT-p VCT-SST-p Complete with colour index, example: 69881-C2 VCT.32-SST-p-M6x16-C2 RAL9005 Clamping knobs # "Max limit Tightening torque" means the max torque value at which the metal insert, in normal conditions of use, is perfectly and strongly anchored to the plastic material. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and p

Open the catalog to page 5