Tubular handles with built-in microswitch MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. MICROSWITCH WITH BUTTON The device is made up of a normally open contact (NO) and a normally closed contact (NC). Standard push-button (1) or protruding push-button (2). STANDARD EXECUTIONS Rear axial output (S), nickel-plated steel 8 pole connector: -- RHFG11-3SG: push button with built-in green led (G) -- RHFG11-3SR: push button with built-in red led (R). -- RHFG11-4SG: protruding push button with built-in green led (G). -- RHFG11-4SR: protruding push button with built-in red led (R). Rear output (K), 8 pole cable, length 5 m: -- RHFG11-3KG: push button with built-in green led (G). -- RHFG11-3KR: push button with built-in red led (R). -- RHFG11-4KG: protruding push button with built-in green led (G). -- RHFG11-4KR: protruding push button with built-in red led (R). FEATURES AND APPLICATIONS These handles with RHFG11 switch are typically assembled on machine doors or protections. By pressing the push button, the operator requests access, via external contact (PLC), to a protected area, shown by the red led turned by the green led turned off. The access to the protected areas will be possible when the red led is turned off or the green led is turned on. ACCESSORIES ON REQUEST RHFZ-KS.G08.10: cable with 8 pole M12x1 connector length 10 m. Electrical features Lift & Pull handles Led light voltage Voltage / button operating current Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

Tubular handles with built-in microswitch Rear output (K), Rear axial output (S), nickel-plated steel 8 pole connector 8 pole cable, length 5 m Lift & Pull handles Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.