Connecting clamps INOX STAINLESS STEEL STANDARD COMPONENTS -- MSX-B base: glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Fitting by means of a stainless steel M5 cylindrical-head screw with hexagon socket and nut. -- MSX-C Two-way clamp: glass-fibre reinforced technopolymer, black colour, matte finish. Fitting by means of stainless steel M5 cylindrical-head screws with hexagon socket and nuts. -- MSX.TA-TB-TC-TD-TE-TF device clamp: glass-fibre reinforced technopolymer, black colour, matte finish. Fitting by means of a stainless steel M5 cylindrical-head screw with hexagon socket and nut. FEATURES AND APPLICATIONS The geometry of the holes of MSX. series connecting clamps are designed to fit both tubes with round cross section and tubes with square cross section; the latter prevents the elements from rotating (see Fig. 1). Levelling elements and supports ASSEMBLY INSTRUCTIONS 1. Assemble the base by means of 2 M6 cylindrical head screws with hexagon socket (not supplied). 2. Fit the connecting tube into the hole of the base and clamp it by screwing the set screw. Suggested tightening torque 5Nm. 3. Insert the connecting tube in the shaped hole of the two-way clamp. 4. Fit the other connecting tube into the hole of the two-way clamp. 5. Insert the connecting tube in the shaped hole of the base and clamp it by screwing the set screw. Suggested tightening torque 5 Nm. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

Connecting clamps Rotation resistance Rotation resistance MSX-TA-TB-TC-TD-TE-TF Pull out Rotation resistance resistance # # [N] [Nm] Levelling elements and supports # Tests carried out with round tube. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.