Catalogs >
ELESA >
MPI-R10

MPI-R10
2Pages

Catalog excerpts

Magnetic measuring system Length and angle modes CASE Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Retaining clip in acetal resin based (POM) technopolymer, black colour, matte finish. PLATE WITH KEYBOARD Polycarbonate resistant to greases, oils, alcohol and mineral acids. PROTECTION CLASS - IP54, see EN 60529 table (on page A-18). - IP67, see EN 60529 table (on page A-18). FEATURES AND APPLICATIONS MPI-R10 measuring system connected to a specific sensor FC-MPI (see page -), combined with the magnetic band M-BAND-10 (see page 686), is a complete system for the measurement of linear and angular displacement (with a minimum radius of 65 mm). Characterised by an extremely easy assembly, it allows precise alignment and positioning, reducing time and machining procedures to the minimum. - Maximum ease of assembly and disassembly operations of the device from the panel, thanks to a system with retention wing (ELESA PATENT). - 7-digit LCD of 12 mm height and special characters. - Programmable with 4 multifuction keys. - Values displayed in millimeters, inches or angular degrees. - Display of absolute or incremental mode. - Up to 10 programmable offset values. - Storage and display of 32 target positions. - Long-life internal lithium battery. - Buffered memory during battery substitution. - Housing for FC-MPI connector with snap-in assembly system for easy insertion and removal. For further information read the operating instructions. SPECIAL EXECUTIONS ON REQUEST The display of special plate may be supplied with customised graphic symbols, marks or writings. MAGNETIC SENSOR WITH CABLE FC-MPI (see page 687) to be ordered separately. ACCESSORIES ON REQUEST Magnetic band M-BAND-10 (see page 686). Mechanical and electrical characteristics Power supply Battery life Display Reading scale Number of decimal digits Unit of measure Max operating speed Resolution (2) Precision (3) Repeatability (4) Linear movement measuring Self-diagnostic Protection class Working temperature Storing temperature Relative humidity Position indicators Angular movement measuring Operating environment Altitude Lithium battery 1/2 AA 3.6 V (included in the supply). 3 years 7-digit LCD of 12 mm height and special characters -199999; 999999 programmable millimeters, inches or angular degrees. programmable 1 ÷ 5 m/s programmable (1) 0.01 mm - 0.001 in - 0.01° ±0.03 mm 0.0002 x L mm (L = value measured in mm) Battery check, sensor check, magnetic tape check IP54 or IP67 0 ÷ 50 °C -20 ÷ +60 °C Max. 95% at 25°C without condensation Internal use Protected (1) Reading speed affects battery life. (2) Resolution: the smallest variation in length that the system is able to display. (3) Accuracy: the maximum deviation of the value measured by the system with respect to the real value. (4) Repeatability: the degree of closeness between a measurement series of the same sample, when the individual measurements are made, leaving the measurement conditions unchanged. Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and

Open the catalog to page 1

Magnetic measuring system ASSEMBLY INSTRUCTIONS - Drill the sheet (thickness 0.7÷2 mm) according to the template dimensions. - Remove all drilling burrs before fitting the case. - Fit the lower part of the case into the housing and press until the complete snap fitting (Fig.1). Drilling template BATTERY REPLACEMENT INSTRUCTIONS - Remove the indicator from its seat, applying pressure to the retention wing bringing it to the stop with the aid of a slotted screwdriver (Fig.2). - Unscrew the AISI 304 stainless steel self-tapping screw with six-lobe socket for TORX®* T06 tool and remove the...

Open the catalog to page 2