Catalogs >
ELESA >
EBR-PN

EBR-PN
1Pages

Catalog excerpts

Handle with pneumatic valve PUSH BUTTON Light-blue technopolymer, glossy finish. MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. SCREW-COVERS Technopolymer, grey-black colour, matte finish. Supplied assembled, removable by a screwdriver. STANDARD EXECUTIONS Brass bosses, threaded blind hole. - EBR-PN-3/2-NO: the pneumatic valve is normally open. The actuation of the button stops the air passage. - EBR-PN-3/2-NC: the pneumatic valve is normally closed. The actuation of the button opens the air passage. - EBR-PN-5/2: the actuation of the button switches the output channel of the air, between the two available. TECHNICAL DATA Tensile stress and impact strength: the values F1, F2, L1 and L2 indicated in the table were obtained during breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature. FUNCTIONING The handle is supplied with quick couplings for direct fitting of a tube Ø 4 mm for pneumatics. The handle allows the direct drive of a single-acting pneumatic actuator (execution 3.2) or double acting (execution 5.2). The force to be applied to the button for the actuation of the drive is independent from the operating pressure. The handle is already set up with discharge function of the pressure chamber. EBR-PN handle can be assembled with EBR neutral handle. Technical features Functioning Operating pressure Working temperature Load capacity 130 N/min (6 bar, free exhaust) Action force 25 N (independent from the operating pressure) Nominal diameter air passage Lift & Pull handles Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and

Open the catalog to page 1