Direct drive electronic position indicators STANDARD MACHINE ELEMENTS WORLDWIDE

Electronic position indicators direct drive, 5-digit display, technopolymer B [pa] [pat] Q (j^ [ip67] BASE AND CASE High-resistance polyamide based (PA) technopolymer Black base. Case in the following colours: - C2: RAL 2004 orange, glossy finish. - C3: RAL 7035 grey glossy finish. Available on request in RAL 7021 grey-black colour (C1). Cover with perfectly sealed gasket and AISI 304 stainless steel UNI 6955 type self-tapping screws with six-lobe socket TORX®T06 (registered trademark by TEXTRON INC.) The ultrasonic welding between the base and the case prevents separation and avoids dust...

Electronic position indicators Mechanical and electrical characteristics FEATURES AND APPLICATIONS DD51-E position indicators, with battery power supply can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component. The 5-digit display of 8,0 mm height ensures excellent readability even from a distance and from different viewing angles. The window in transparent technopolymer protects the LCD display against accidental shocks. The high protection degree, IP 65 or IP67, makes the indicator suitable for applications...

Electronic position indicators direct drive, 6-digit display, technopolymer BASE AND CASE High-resistance polyamide based (PA) technopolymer Black base. Case in the following colours: - C2: RAL 2004 orange, glossy finish. - C3: RAL 7035 grey glossy finish. Available on request in RAL 7021 grey-black colour (C1). Cover with perfectly sealed gasket and AISI 304 stainless steel UNI 6955 type self-tapping screws with six-lobe socket TORX®T06 (registered trademark by TEXTRON INC.). The ultrasonic welding between the base and the case prevents separation and avoids dust penetration. BOSS AISI 304 stainless...

Electronic position indicators Mechanical and electrical characteristics FEATURES AND APPLICATIONS DD52R-E position indicators, with battery power supply can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component. The 6-digit display of 12,0 mm height ensures excellent readability even from a distance and from different viewing angles. The window in transparent technopolymer protects the LCD display against accidental shocks. The high protection degree, IP65 or IP67, makes the indicator suitable for applications...

Direct drive electronic position indicators The position indicators with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component. Thanks to the available functions and to the programmable parameters, one item can be used for many applications including all shaft pitch variations, direction of rotation, unit of measure etc. Wide display 5 digit display of 8 mm (DD51-E) or 6 digit display 12 mm (DD52R-E) height. Ensures excellent readability even from a distance and from different viewing...

Available functions By using the function keys, it is possible to: • select the incremental or the absolute measure mode • convert the linear unit of measure (mm, inches) or select the angular measure mode (degrees) • set the source value of the absolute counter • select the offset value Programmable parameters The function keys allow to program: • the reading after one revolution of the shaft • the direction of rotation • the resolution (number of decimal digits) • the diplay orientation • the source value and the offset value • the max. speed of rotation • the functions of the keys among different options...

dcfa ELESA S.p.A. Via Pompei, 29 20900 Monza (MB) Italy phone +39 039 2811.1 fax +39 039 836351 [email protected] elesa.com © Copyright ELESA 2017