Hinge with built-in safety multiple switch STANDARD MACHINE ELEMENTS WORLDWIDE

Hinges with built-in safety multiple switch MATERIAL - Hinge body: self-extinguish high-rigidity SUPER-technopolymer black or grey colour RAL 7040 (C33). - Rotation pin: glass-fibre reinforced polyamide-based tecnopolymer (PA), black or grey colour RAL 7040 (C33). - Assembly kit(see assembly instructions): - n°4 technopolymer covers (fig.3). - n°4 technopolymer bushings (fig.4 e fig.5). - n°2 thermoplastic elastomer safety plugs (fig.7) to guarantee IP67 protection class. - Switch: four slow action electrical contacts with double interruption Zb shaped (see IEC EN 60947-5-1) wich can be set in...

Hinges with built-in safety multiple switch ACCESSORIES ON REQUEST - FC-M12x1: extensions with 8 pole M12 female axial connector - PMW. : assembly plate on T-slot profiles. SPECIAL EXECUTIONS ON REQUEST - Operating angle of the hinge other than from 0° to 180°, every 15°, where the system frame/door requires a special execution. - NC and NO contact blocks setting (up to 4 NC). - NO and NC ovelapping contacts. ASSEMBLY INSTRUCTIONS CFSW. hinge can be assembled in three different modes: - With M6 UNI 5933 ISO 10642 countersunk-head screw (not supplied) and screw cover supplied in the kit (fig....

Hinges with built-in safety multiple switch BUILT-IN SAFETY MULTIPLE SWITCH FUNCTIONING AND MAINTENANCE - The operating angle (see travel diagram) is set at 5° (we suggest to check it according to UNI EN ISO 13857). - To guarantee the safety protection function, the hinge must be able to turn at least by 11° (see travel diagram), equivalent to the forced opening of the NC contacts by the actuator (positive opening). - The adjustment of the operating angle can be modified, in case of doors with large dimensions, till 1° of width before the start up of the hinge by adjusting the assembly screw...

Hinges with built-in safety multiple switch CFSW-F-A CFSW-F-B CFSW-FC-BCFSW-F-C Code # Suggested tightening torque for assembly screws. Index C33: hinge RAL 7040 grey colour. All rights reserved In accordance with the law. Always mention the source when reproducing our drawing

Hinges with built-in safety multiple switch Resistance tests Max limit static load Max limit static load Max limit static load For CFSW. hinges with built-in safety multiple switch, the reference value supplied is the max limit static load (Sa, Sr, S90), since these hinges can be used as safety devices. Above this value, the material may break, thus prejudicing the hinge functionality. Obviously a suitable factor according to the importance and safety level of the specific application, must be applied to this value. The load values shown in the tables of the different hinges are the result of...

HingesSUPER-technopolymer MATERIAL Glass-fibre reinforced polyamide (PA) SUPER-technopolymer black or grey colour RAL 7040 (C33), matte finish. ROTATING PIN Glass-fibre reinforced polyamide based (PA) technopolymer, black or grey colour RAL 7040 (C33). ASSEMBLY KIT (SEE ASSEMBLY): - n°4 technopolymer covers (fig.1). - n°4 technopolymer bushings (fig.2 and fig.3). MOUNTING CFMW. hinge can be assembled in three different modes: - With M6 UNI 5933 ISO 10642 countersunk-head screw (not supplied) and screw cover supplied in the kit (fig. 1) to avoid free access to screws. - With cylindrical-head screw...

Hinge with built-in safety multiple switch The new hinge CFSW. with built-in multiple switch (ELESA patent) is a safety device. In case of accidental opening of doors, machine protections or safety doors on machines and production equipment, it automatically breaks off the power supply hence protecting the operators. The CFSW., coupled with its complementary mechanical hinge CFMW. represents a complete system combining safety and style. Safety switches Available with different combinations of contacts with positive opening (2NO+2NC, 1NO+3NC, ...). Quick assembly 4 screws assembly - front or back...