UAD6(n) Easy Voltage Tap for Wire In existing installations there is rarely a fused terminal available for measurement purposes. This unique tapping clamp allows you to tap a fused voltage from an insulated wire for measurement using one hand and without the need for additional tools. The fuse is mounted directly on the primary conductor, which results in an optimum degree of safety. This unique product is a breakthrough for fast and safe measurement in existing installations The UAD6 is obtainable in a fused and non used version. Technical specifications Safety conditions: CE Directive: Standard: Environmental conditions Standard: Class: Operating temp.: Relative humidity: Operating height: Protection degree: Pollution degree: Measurement category: •One-handed and safe tapping of voltage for measurement purposes •No tools needed •Safe mounting •Including 5x25mm, 2A fuse •For insulated 2.5-6 mm2 conductors, stranded, solid (rigid) and flexible wire Cable dimensions UAD6-R, fused, for 2.5-6mm² rigid (solid, stranded) wire UAD6n-R, not fused for 2.5-6mm² rigid (solid, stranded) wire UAD6-F, fused for 2.5-6mm² flexible wire UAD6n-F, not fused for 2.5-6mm² flexible wire UAD6 set, 3xUAD6-R + 1xUAD6n-R UAD6 set, 3xUAD6-F + 1xUAD6n-F Wiring diagram Low voltage directive 2006/95/EC IEC 60998 (clamp), IEC 60947(fuse) IEC 60721-3-3:1996 3K3 +5°C - +55°C 5% - 85%, non condensing 0..2000m over NN IP20, basic insulation 2 CAT III Application conditions Only suitable for: Conductors with basic insulation Insulation material: Wire diameter: UAD6(n)-R: UAD6(n)-F: Umax: Test voltage: Impulse voltage: Imax: Voltage drop: Fuse (UAD6-R/F): Sec. lead: Usability: Torque: Storage Temperature: Relative humidity: Weight: Dimensions: Material: