FAGET compact CT for energy measurement More often current has to be measured on a lower level of the installation. Because of that current values are relatively low and the available space is limited. Further more, the accuracy has to be sufficient for power measurement (at least class 1). Usually, these features are difficult to combine. The DRT49A12 combines these features in one product. Because of the unique construction, no additional soldering or crimping joints are required. This makes the DRT49A12 extremely reliable. The leads have a length of 1 m. Technical specification DRT49A12 Current ratio Accuracy Rated burden Continuous current Short time current Frequency 64/1A (32/1A & 16/1 A) Class 1 0,5VA 120% 60xIn/1s 50Hz Leads Ambient temperature Standard Material 0,5mm2 45°C max. IEC60044-1 PA6.6 Dimensions Applicability S2(l) Sl(k) Ratio 64/1A @ 1 primary turn Rated current 64A Max. current 76A 16A Ordering specification Ratio 16/1A @ 4 primary turns Rated current 16A Max. current 19A Article number l_ead length 4M12S1 1 metre Primary conductor WWW.ELEQ.COM ELEi ?1ELEG'V develops. produces and markets FAGET" and KWK'"