Catalog excerpts
Numerical Displays for Displaying Time, Date and Temperature NDC Series Digital Clocks The NDC series digital clocks are designed for displaying time, date and temperature in a numerical form. In their design, the maximum emphasis was put on the functional reliability and aesthetic appearance. NDC 57/x and 100/x models are suitable especially the use in architecturally demanding bank interiors, public institutions, companies, etc. As a standard, they are delivered in platinum matt grey surface finish. Superbright 7-segment LED modules are used as displaying elements. The larger NDC 160/x, 212/x types are designed for outdoor or industrial indor/outdoor use. They have double-casing protection with an internal steel frame and an external aluminum frame. These types of the NDC clock series use ultrabright LEDs, which ensure their good visibility even in direct sunlight. The level of brightness of NDC series clocks is controlled manually or automatically according to the intensity of the surrounding light. A local or remote temperature sensor and GPS receiver can be connected to all types of NDC clocks, which allows to achieve a long-term GPS time precision without the necessity to adjust time. The user can choose automatic switching from the summer to winter time and back (Daylight Saving Time) and utilize stopwatch and count-up/down features for exact time measurements. A switching contact of a builtin relay is available, activated upon the end of counting down/up or activated according to programmed time intervals, which allows to use the clock for time signalling at schools. The clocks are ready for installation into unified time displaying systems – their synchronisation in a network is secured by their connection to the NDC-net (simple 2-wire connection through a standard RS485 serial interface) and by the user configuration. The clocks can be pre-programmed for displaying time, date, temperature, as a stopwatch, for counting-up/down and for alternate displaying the above readings and thus to be adjusted for displaying according to individual needs. Moreover, a time shift can be set, which allows to use the clocks in various time zones even with the synchronisation through the GPS. Wireless IR remote control (like a TV control) allows to set the time, the date and the programming of the clock. If external time synchronisation is used (e.g. GPS receiver), the time and date are adjusted automatically. The clocks are designed for the installation on a wall, NDC 160/x and 212/x types are supplied with a tilting wall bracket as a standard. Parameters of NDC digital clocks in details • Time – Hours:Minutes or Hours:Minutes:Seconds reading, time zone setting, time correction of ±23 hours 59 minutes, automatic Daylight Saving Time option. • Date – Day.Month or Day.Month.Year reading (depending on type of clock). • Temperature – -99° ÷ -10°, -9.9° ÷ 99.9° or -99°C ÷ -10°C, -9.9°C ÷ 99.9°C reading range, if local or remote thermal sensor is connected. • Stopwatch mode – Start/Stop/Freeze/Reset, resolution in hundredths of seconds, automatic decreasing of resolution, when seconds are filled up, of the stopwatch by IR remote control, by local or by remote close contact. • Counter – count-up or count-down – user defined counting limit in the range 1s to 99 days, 23 hours, 59 minutes, 59 seconds, automatic adjustment of the reading format, Start/Stop/Resume/Reset, contact of built-in or remote relay is closed, when the counter reaches the limit, control of the counter by IR remote control, by a local or remote close contact. • Switch clock mode – user defined 16 switching times of the built-in or remote relay, adjustable relay switch-on state period in the range 0.01 – 99s, setting of switch-on days (weekly calendar Sunday – Saturday). • The clock allows alternate display of the above data, while the user can program the duration of their displaying in the range 0 – 60s. • The clocks are ready for installation into system for displaying unified time by their connection to the NDC-net bus (2-wire RS485 connection). • Optional external time synchronisation by means of a synchronisation module connected to the NDC-net bus, e.g. GPS receiver. • Optional connection of local or remote thermal sensor. • Time precision – ±5 sec/month (autonomous time, in +20°C ÷ +30°C temperature range), or the precision is given by the precision of the synchronisation, if an external synchronisation module is connected (e.g. GPS). • Inputs/Outputs – RS485 interface for the connection to the NDC-net bus (with the galvanic insulation for an extra fee), an input for the connection of a local button (close contact, max. 5 m cable length) for controlling the stopwatch/counter (with the galvanic insulation for an extra fee), an input for connecting a local temperature sensor (max. 5 m), built-in output relay 2A/250VAC, which can be closed for 0.1s – 99s in the counter mode or in the switch clock mode. • Automatic (depending on ambient light conditions) or manual brightness setting in 15 levels. • Clock programming and setting wirelessly by means of IR remote control up to 20 m. Standard accessories • Flexible power cord, fixed to back panel via cable gland (NDC 100/x, 57/x). • Hanging brackets, attached on the back panel (NDC 100/x, 57/x). • Connector for power supply cable (for models NDC 160/x and 212/x only). • Tilting console for wall mounting (for models NDC 160/x and 212/x only). Date and temperature reading Optional accessories • IR remote control for manual setting of clock parameters. • Local temperature sensor. • Remote temperature sensor with RS485 interface. • GPS Receiver for time syn
Open the catalog to page 1Numerical Displays for Displaying Time, Date and Temperature NDC Series Digital Clocks Technical specifications Type NDC 57/4 NDC 57/6 NDC 100/4 NDC 100/6 NDC 160/4 NDC 160/6 NDC 212/4 NDC 212/6 Readability range Digit height Time format Date format Temperature format HH:MM HH:MM:SS HH:MM HH:MM:SS HH:MM HH:MM:SS HH:MM HH:MM:SS DD.MM DD.MM.YY DD.MM DD.MM.YY DD.MM DD.MM.YY DD.MM DD.MM.YY Dimensions and weights Type NDC 57/4 NDC 57/6 NDC 100/4 NDC 100/6 NDC 160/4 NDC 160/6 NDC 212/4 NDC 212/6 Display element type 7-segments superbright LED modules NDC-net (RS485); IR Remote Control; GPS...
Open the catalog to page 2All ELEN catalogs and technical brochures
-
NDT SERIES
4 Pages
-
GPS Time Receiver
1 Pages
-
CDN 100 THS R L20 230AC
2 Pages
-
TDU 99-16/xxx...H54
2 Pages
-
TDU 122-16/xxx...H54
2 Pages
-
TDU 200-20/xxx...H54
2 Pages
-
Church (psalm) displays
4 Pages
-
Digital clocks
2 Pages