RF1222 // RF1555

1 / 2 PagesView full catalog

RF1222 // RF1555

Product catalog summary

Key Features:

Self-refilling technology and radio frequency excitation for high reliability and beam quality.
Low operating cost with easy integration and high electrical/optical conversion efficiency.
Integrated RF power supply and TCP/IP connection for remote diagnostics and control.
Integrated shutter for safety and onboard HMI panel.

Main Applications:

High-performance remote processing.
Cutting of plastics, wood, leather, textile, and steel.
Digital converting and high-speed cutting of paper, cardboard, and labels.

System Specifications:

Models: RF 1222 and RF 1555 with rated powers of 1200W and 1500W respectively.
Effective peak power of 2400W and power stability of ±5%.
Wavelength of 10.6 ± 0.4 µm with linear vertical polarization.
Beam diameter of 9 ± 0.5 mm and beam divergence of 2.0 ± 0.1 mrad.
Maximum pulse frequency of < 100 kHz and pulse width range of 2 to 150 µs.
Mode quality (M2) of < 1.2 and beam ellipticity of 1.2:1.
Typical gas mix consumption of 65 NL/year and pulse rise/fall time of < 50 µs.
Environmental temperature range of 5° to 35°C with non-condensing humidity at inlet water temperature.

Electrical Power Requirements:

Input voltage of 48 ± 0.5 VDC and maximum current of 400 A.

Coolant Specifications:

Heat dissipation of 20000 W and coolant temperature of 20 ± 1°C.
Water cooling input pressure of < 6 bar and flow rate of ≥ 40 L/min for RF 1222 and ≥ 45 L/min for RF 1555.

Dimensions and Weight:

Dimensions of 1820 x 565 x 446 mm and weight of 300 kg.
Integrated RF power supply and safety shutter.

Additional Notes:

El.En. SpA reserves the right to change specifications without notice, and products must comply with applicable regulations before resale.
Produced under a quality assurance system certified according to ISO 9001.

Catalog excerpts

© El.En. 003-1010 -21-020 Rev. 1.0 El.En. All rights reserved - Technical data and pictures are not binding - In the aim to improving its products the company reserves the right to change the technical features without prior notice Never ending power lasers High Power CO2 lasers 1200W and 1500W KEY FEATURES Self reﬁlling technology Radio Frequency excited Low operating cost & easy integration High reliability & high beam quality Same size for all powers High electrical/optical conversion eﬃciency Integrated RF power supply TCP/IP connection for remote diagnostics and control Integrated shutter for safety certiﬁability On board HMI p

Open the catalog to page 1

RF 1222 // RF 1555 Never ending power lasers The Blade RF 1222 and 1555 join the advantages of the RF excitement technology (high peak power, high frequency modulation, compactness) with the incredible advantage of virtually “no factory service” requirement of the self reﬁlling solution. MAIN APPLICATIONS: © El.En. 003-1010--21-020 Rev 1.0 El.En. All rights reserved - Technical data and pictures are not binding - In the aim to improving its products the company reserves the right to change the technical features without prior notice • high performance remote processing • plastics, wood, leather,...

Open the catalog to page 2

RF1222 // RF1555

RF1222 // RF1555

Catalog excerpts

All El.En. S.p.A. catalogs and technical brochures

Archived catalogs