ELECTRONIC ENGINEERING 1. linear motor long stroke dinamic focusing Z-axis 3 -axis Galvo Scanner series high performances for advanced remote applications 2. high power and precision galvanometers 3. digital drives with self tuning and realtime fit-to-signal parameters settings 4. high efficency and stability optical objective 5. spatial alloys mirrors for the highest stiffness at minimum inertia momentum Working tield(mm)_ <t> 1/e2 (pm)(1) Optical scanning deflaction (mrad) Scanning speed (m/s)(2) Scanning acceleration (m/s2)(2) Positioning resolution (prad) Dimension (WxLxH) (mm) Weight (kg) (1) average on the working field for laser beam M2s1.2 (2) depending on the working field EI.En. S.p.A. Via Baldanzese, 17 - 50041 CALENZANO (FI) - ITALY Tel. +39 055 8826807 - Fax +39 055 8832884 www.elengroup.com - www.elen.it - [email protected] Typical applications: - Marking - Cutting - Engraving - Welding - Heat-treatment © EI.En. 003-1995-14-020 Rev. 1.1 EI.En. All rights reserved - Technical data and pictures are not binding - In the aim to improving its products the company reserves the right to change the technical features without prior notice

GiOSCAN The GIOSCAN 1735/1770HR line is a family of 3-axis scanning heads with 35mm and 70mm beam aperture for CO laser. Available ² with different working areas (and consequently spot-size) from 135x135mm to 800x800mm with power up to 500W and from 350x350mm to 2300x2300mm with power up to 2000W. These are the most versatile and compact solutions for marking and engraving on different materials. • standard and beryllium mirrors • on-the-fly processing capability • small spot • fast Z-axis • high accuracy • wide selection of working areas • DSP galvo drivers Voyager Control Unit Voyager control...