WSN 60 - Wide range switching power supply

Product catalog summary

Overview: The WSN 60 is a wide-range switching power supply designed for regulated output voltage of 24 V DC with a current of 2.5 A. It features short circuit and overload protection, LED operation supervision, and is mountable on a DIN rail.

Technical Specifications:

Input: Nominal voltage is 230 V AC at 50/60 Hz, with a voltage range of 90 - 264 V AC. Nominal current is 0.3 A at 230 V AC and 0.6 A at 115 V AC. Maximum input current is 45 A at 230 V AC and 30 A at 115 V AC.
Output: Nominal voltage is 24 V DC with a ripple and noise of 240 mV p-p. Nominal output current is 2.5 A, with a maximum of 2.75 A. Nominal output power is 60 W, with a maximum of 66 W for 10 seconds.
Protection: Overload protection is between 115% and 150% of nominal output power. Insulation resistance is 100 MΩ at 500 V DC according to EN 60950-1.
EM Compatibility: Complies with EN 61000-6-2, EN 61000-4-2,3,4,5,6,8,11 for noise immunity and EN 50081-2, EN 55011, EN 55022 for noise radiation.
Ambient Conditions: Operating temperature ranges from -20 to +60°C, and storage temperature from -40 to +80°C. Relative humidity is 20% to 90% non-condensing.
Mechanical Data: Dimensions are approximately 120x50x80 mm, with a weight of 500 g. It is designed for assembly on a DIN rail TS35 according to EN60715:2001-09.

Installation Notes: Devices must be mounted vertically with vents unsealed and a minimum distance of 20 mm from vents to ensure sufficient cooling.

Ordering Information: Article number 101WSN060-5B describes the WSN 60-230/24 model. Additional power supplies include CBS and PLG 60 models with specific features for different applications.

Catalog excerpts

WSN 60 - Wide range switching power supply-1

Power supply WSN 60 - Wide range switching power supply › Regulated output voltage 24 V DC, 2.5 A › Short circuit and overload protection of the output current › Operation condition supervision by LED › Mountable on DIN rail

Open the catalog to page 1

WSN 60 - Wide range switching power supply-2

WSN 60 - Wide range switching power supply Technical data Input: Nominal voltage Voltage range *1 Nominal current *2 Maximum input current (typically) No-load power consumption Leckage current (L1,N Earth) Output: Nominal voltage Ripple & Noise Nominal output current Accuracy (0...100 % load) Maximum output current Nominal output power Maximum output power *3 Over load protection Switching frequency Degree of effectiveness Insulation resistance Primary side against secondary side and primary side against functional earth and secondary side against functional earth Insulations voltage effective...

Open the catalog to page 2

WSN 60 - Wide range switching power supply-3

POWER SUPPLY /f\ To guarantee a sufficient cooling of the devices please consider the following notes: - Devices have to be mounted in vertical direction ! - Do not seal or cover vents ! Minimum distance to the vents should be at least 20 mm ! Am bient Tern perature { Q Tolerable output power in dependency of the ambient temperature Terminal assignment line input

Open the catalog to page 3

WSN 60 - Wide range switching power supply-4

WSN 60 - Wide range switching power supply Dimensional drawing Dimension in mm Subject to technical changes reserved Ordering code Article number Description 101WSN060-5B Please pay attention also to our other power supplies: CBS - condenser buffered 24 V power supply unit • • • • • output nominal current 2 A high life time: 30 years@30° degrees Celsius maintenance-free by long-lasting ultra condensers energy storage for 500 J or 1000 J broad voltage input 115 … 230 V AC PLG 60 - accumulator buffered 24 V power supply unit • use for lead and gel accumulators with capacities of 1.2 Ah to 38 Ah...

Open the catalog to page 4

All Elektra Elektronik GmbH & Co. Störcontroller KG catalogs and technical brochures

Archived catalogs

Panel-mounted fault annunciator
16 Pages