Controllers For power, stirring and temperature control Electrothermal have a comprehensive range of controllers to provide power and temperature control for all your laboratory equipment. Page 42 Please scan the QR/Mobile Tag with your smartphone for more information Electrothermal Catalogue

1-Way Controllers Introduction There is a choice of 3 models of 1-Way Controllers which operate up to 800W (MC5), 1800W (MC242) or 2300W (MC227); MC228X1 operates up to a maximum of 1100W. These controllers can control one piece of laboratory equipment at a time, or an equivalent load, ie. on a CMUV22/L which has 3 elements, you With Electric Bunsen can have an MC5 on each element. MC5 Controller Operates at up to 800W The MC5 Controller has been designed to provide a complete answer in controlling the heating of resistive loads for bench top operation. It delivers power up to a maximum of 800...

Controller: Operates at up to 800W The MC242 Controller has been designed to regulate the power input to laboratory heating equipment such as Electromantles, Heating Tapes and Cords. It operates up to a power load of 1800W for the 230V model and 1150W for the 115V model. The MC242 Controller has 2 neon indicators: "Power On" white neon light "Mantle/Bunsen Heater On" amber neon light; It has a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the controller's amber neon lamp will pulsate to show that power is being supplied to the equipment being controlled,...

• Able to control two pieces of laboratory equipment simultaneously The MC240 is a 2 channel device which provides the user with the • Three neon indicators option to control two pieces of laboratory equipment running simultaneously, but independently of each other. It operates up circuit, at either 115 or 230 Volts. to a maximum of 800W per circuit, at either 115 or 230 Volts. The MC240 2-Way Controller has been designed to work with: • EM series Electromantles • CMU series Electromantles • Electric Bunsen • Heating Tapes and Cords The MC240 Controller has 3 neon indicators: • “Power On” green...

MC810B • PTFE-covered platinum resistance thermometer is included for measurements to 270°C • Zinc die-cast outer case is suitable for the bench or can be mounted on a 12.7cm support rod • Programming is done by up/down controls • Three-digit LED display allows you to set a 1°C resolution over a range of -10°C to 800°C Digital Controller The MC810B Digital Controller provides a convenient means of temperature control, using microprocessor techniques to give ease of operation and good accuracy. It can be used in 3 ways: • In On/Off mode with the hysteresis loop controlling power switching • As...

Flow monitors can be used in conjunction with the Multi (Extraction) Mantles EME and EMEA series. The new Electrothermal FM110 Flow Monitor has been carefully designed to provide increased safety in the laboratory by the monitoring of aqueous liquid used in heating-cooling applications and process control. The turbine assembly is comprised of components made from chemically resistant materials such as PVDF, sapphire, ceramic and viton. A rod support clamp is provided at the rear of the controller to take a standard 12.5mm (1/2") diameter rod. Two versions of the Flow Monitor are available, covering...