Specifications:
The document describes push-wire terminals with integrated discharge resistors and solder lugs without discharge resistors. Both types use a base mounting stud M8, nut, and washer. The lighting capacitors are designed for series compensation of fluorescent lamps, with an aluminum casing and filling material based on vegetable oil, free of PCBs. The safety device includes a break action mechanism for overpressure protection, and the mounting position is optional.

Electrical Parameters:
The capacitors operate at 480V with a frequency of 50/60Hz. Discharge occurs to less than 50V in 60 seconds. Capacitance tolerance is ±4% (optional ±2%). Test voltages include UBB at 2.15 UN ac and UBG at 3000V ac. The test class is 40/100/21 according to IEC 68.

Environmental Conditions:
The operating temperature range is -40°C to +100°C. The climatic category is F, and condensation is not permitted. Relative humidity should have an annual mean of 75%, with a maximum of 95% for 30 days and 85% for all other days.

Standards and Approvals:
The capacitors comply with IEC / DIN EN 61048: 2006 for safety and IEC / DIN EN 61049 for performance requirements. They also have GOST approval.

Dimensions and Ordering Information:
Various capacitance values and dimensions are available, with specific order codes and design codes provided for each. Box types and dimensions for packaging are specified, with the number of boxes per pallet varying by box type.

Additional Notes:
Safety, mounting, and operating instructions are detailed on pages 15 and following. Other values and dimensions are available upon request.