EM-82-05A & EM-82-50A VIBRATION SENSOR FEATURES • acceleration sensor • 5g and 50g version • good stability • linear frequency response • internal buffer amplifier • wide supply voltage range • MEMS-type based • improved EMI-suppression (ver.A) Mounting holes 4.2mm, distance 25,4mm MOUNTING ±5 0g EM AC -8 2C EL 50 O A M ET /± 2V ER Mounting to base with two M4x40 screws. Depth of thread at least 8mm. Use a crinkle washer under the screw. Use also a srew locking paste to ensure mounting. tighting torque 3.0 Nm locking paste Loctite 242 + g - CABLE CONNECTIONS PUR supply signal gnd shield Habia brown black green brown white blue shield TECHNICAL DATA supply current consumption operating temperature scaling EM-82-05A EM-82-50A precision frequency range measuring range EM-82-05A EM-82-50A noise level EM-82-05A EM-82-50A thermal drift cable dimensions housing weight typ. frequency range EM-82-05A fig 1 7...32Vdc 5mA -20...85°C 400mV/g 40mV/g typ. ± 3% (159Hz) see figure 1&2 +3% 0 -3% -6% 5 10 ± 49m/s² (amplitude) ± 490m/s² (amplitude) 2 50 100 20 500 1000 2000Hz typ. frequency range EM-82-50A fig 2 0.2m/s² (RMS) (0-2000Hz) 1,5m/s² (RMS) (0-2000Hz) <0.05% /°C 3m 25x25x35mm IP67 approx. 60 g 200 +3% 0 -3% -6% -30% -70% 5 10 2 50 100 20 200 ELECTROMEN Oy Vähäheikkiläntie 56B, 20810 Turku, FINLAND 500 1000 2000Hz Tel. +358-2-4693050 Fax. +358-2-4693052