EM-162 230VAC/1A POWER CONTROLLER FEATURES: • Triac, phase angle controller • 10...200W, suitable loads: resistor, fan motor and transformer • Base level adjustment • 0...10V or 4...20mA control • Galvanic isolation • Rail base mountable • EMC tested EM-162 is a triac phase angle controller. The unit works fine with both resistive and inductive loads due to advanced triggering technique. Suitable loads include for example lamps, resistors, fan motors and transformers. Base level adjustment can be used to set the start level 0-25%. This function is useful especially in lighting and fan usage. The control stage is galvanically isolated from power stage, which means the unit is easy to connect to a part of an automation system. The power stage is equipped with a fuse, the control stage is protected against over voltage and reversed polarity. TECHNICAL DATA Supply Current consumption Load Control range Base level adjustment Aux. voltage Aux. v. current Control Control start Fuse Isolation voltage Operating temp Dimensions Weight 190-265Vac 1A max. 10-200W 0-99% 0-25% 12-30Vdc 20mA max 0-10V / Rin 100k 4-20mA / Rin 180R 100mV / 4.2mA T1.6A 1500Vrms -10...50°C 90,60,36mm approx. 70g MODULBOX 36mm ( DIN EN 50022 & DIN 43880 ) OUTPUT POWER 99% PRESET BASE LEVEL 10V CONTROL 20mA 0V 0.1V 4mA 4.2mA FUSE 20X5 BASE LEVEL 4...20mA 0% 0...10V EM-162 TRIAC-CONTROLLER 200W 230Vac N N LOAD 3 IS0LATION BASE LEV. GND 1 2 1 mA 3 6 6 GND 5 2 A L 25% 5 CONTROL INPUT 4 4 12-30Vdc CONT. V 12-30Vdc L ELECTROMEN Oy Vähäheikkiläntie 56B, 20810 Turku, FINLAND Tel. +358-2-4693050 Fax. +358-2-4693052