*mydirectindustry

Catalogs
Electrohms
Hall Effect Current Sensor HSS200…1K5T01

Hall Effect Current Sensor HSS200…1K5T01

1 / 4 PagesView full catalog

Hall Effect Current Sensor HSS200…1K5T01

Product catalog summary

Features and Advantages

Isolated plastic case recognized according to UL 94-V0.
Excellent accuracy, good linearity, low temperature drift, optimized response time, wide frequency bandwidth, and current overload capability.

Insulation Characteristics

Dielectric strength: 4.9 kV.
Comparative tracking index: 250 V.
Impulse withstand voltage: 9.9 kV.
Insulation resistance: >1000 MΩ.
Creepage and clearance distance: 11.0 mm.

Applications

AC variable speed drives, servo motor drives, static converters for DC motor drives, battery supplied applications, UPS, SMPS, and power suppliers for welding applications.

Standards

EN 50178 and UL508.

Product Range

Various models with primary nominal currents ranging from 200A to 1500A, with corresponding measuring ranges.

Specifications

Burden resistance: >10 kΩ.
Output voltage: ±4 V at ±Ipn.
Supply voltage: ±15 V.
Current consumption: ±15 mA.
Overall accuracy: ≤ ±1%.
Linearity error: <1%.
Temperature coefficient: ±0.1 %/K.
Reaction time: <5 µs.
Frequency bandwidth: 0 to 25 kHz.
Operating temperature: -40 to +105°C.

Mechanical and Connection Details

Connector header and suggested mating connector details provided.
Sensor mounting instructions with recommended torque.
Output is positive when current flows in the direction of the arrow.

Safety Instructions

Use in compliance with applicable standards and safety requirements.
Risk of electrical shock; certain parts can carry hazardous voltage.
Protective housing or additional shield recommended.
Ensure safe separation between primary and secondary circuits.

General Information

Electrohms reserves the right to make product modifications without prior notice.

Catalog excerpts

Hall Effect Current Sensor HSS200…1K5T01-1

Features • Isolated plastic case recognized according to UL 94-V0 Advantage • Excellent accuracy • Good linearity • Low temperature drift • Optimized response time • Wide frequency bandwidth • Current overload capability Applications • AC variable speed drives and servo motor drives • Static converters for DC motor drives • Battery supplied applications • Uninterruptible power supplies (UPS) • Switched mode power supplies (SMPS) • Power suppliers for welding applications Application domain • Commercial • Industrial Standards • EN 50178 • UL508

Open the catalog to page 1

Hall Effect Current Sensor HSS200…1K5T01-2

Hall Effect Current Sensor HSS200...1K5T01 ELEctruhms Product Range Note 1: UL conformance is only applicable for Ta = -40° to 85°C Input & Output Characteristics

Open the catalog to page 2

Hall Effect Current Sensor HSS200…1K5T01-3

Hall Effect Current Sensor HSS200...1K5T01 ELEctruhms Potted Surface Potted Surface

Open the catalog to page 3

Hall Effect Current Sensor HSS200…1K5T01-4

Hall Effect Current Sensor HSS200...1K5T01 ELEctruhms • Connector on the product: Connector header, part no-22-04-1041, Molex • Suggested mating connector: Connector housing, part no-22-01-1042, & corresponding pin part no: 08-50-0114, Molex • Sensor mounting: 2 holes X 0 4.5mm, M4 steel screws, recommended fastening torque 3 N-m • It is recommended to centrally locate the current carrying conductor or completely fill the central opening for optimum performance • Output is positive when current (Ip) flows in the direction of arrow • Ensure proper connection of Power supply to avoid damage to...

Open the catalog to page 4

Hall Effect Current Sensor HSS200…1K5T01

Hall Effect Current Sensor HSS200…1K5T01

Catalog excerpts

All Electrohms catalogs and technical brochures