*mydirectindustry

Catalogs
Electrohms
Hall Effect Current Sensor HK050…500T09

Hall Effect Current Sensor HK050…500T09

1 / 4 PagesView full catalog

Hall Effect Current Sensor HK050…500T09

Product catalog summary

Features and Advantages

Split core type, open loop current sensor with voltage output and panel mounting type.
Advantages include good linearity, no insertion losses, and low power consumption.

Insulation Characteristics

Dielectric strength: 3.0 kV between primary and secondary terminals.
Comparative tracking index: 250 V.
Insulation resistance: >100 MΩ at 500 VDC.
Creepage distance: 34.00 mm; Clearance distance: 23.00 mm.

Applications

Used for measuring electric AC, DC current, and pulsed in electric & electronic equipment.
Applicable in commercial and industrial domains.

Standards

Complies with EN 50178 and UL508 standards.

Product Range

Includes models with primary nominal currents ranging from 50A to 500A, with corresponding measuring ranges.

Specifications

Burden resistance: 10 kΩ; Output offset voltage: ±25.0 mV.
Output voltage at ±Ipn: ±4.0 V; Supply voltage: ±15 V.
Current consumption: 25.0 mA; Overall accuracy: ±2.0%.
Linearity error: <1.0%; Temperature coefficient: ±0.1%/K.
Reaction time: 3.0 µs; Frequency bandwidth: 20 kHz.
Operating and storage temperature: -25 to +85 °C; Mass: 80 g.

Mechanical and Connection Details

Connector header part no: 5441294; Suggested mating connector part no: 5441223.
Sensor mounting requires M4 steel screws with recommended torque of 3 N-m.
Ensure proper connection of power supply to avoid damage.

Safety and General Information

Must be used in compliance with applicable standards and safety requirements.
Risk of electrical shock; certain parts can carry hazardous voltage.
Protective housing or additional shield recommended; main power disconnection must be possible.
Over currents can cause additional voltage offset; primary conductor temperature should not exceed 100 °C.
Ensure safe separation between primary and secondary circuits during installation.
Electrohms reserves the right to make product modifications without prior notice.

Catalog excerpts

Hall Effect Current Sensor HK050…500T09-1

Hall Effect Current Sensor HK050...500T09 Ipn = 50A...500A Features • Split core type • Open loop current sensor • Voltage output • Panel mounting type Advantage • Good linearity • No insertion losses • Low power consumption Applications • Used for measurement of electric AC, DC current • Pulsed in electric & electronic equipment Application domain • Commercial • Industrial Standards • EN 50178 • UL508 Insulation Characteristics

Open the catalog to page 1

Hall Effect Current Sensor HK050…500T09-2

Hall Effect Current Sensor HK050...500T09 ELEctruhms Product Range Input & Output Characteristics

Open the catalog to page 2

Hall Effect Current Sensor HK050…500T09-3

Hall Effect Current Sensor HK050...500T09 ELEctruhms Potted surface Potted surface

Open the catalog to page 3

Hall Effect Current Sensor HK050…500T09-4

Hall Effect Current Sensor HK050…500T09 • • • • • • Connector on the product: Connector header, Part no-5441294, Phoenix contact Suggested mating connector: Connector housing, Part no- 5441223, Phoenix contact Sensor mounting: 2 Slots X Ø 4.5mm, M4 steel screws, recommended fastening torque 3 N-m It is recommended to centrally locate the current carrying conductor or completely fill the central opening for optimum performance Output is positive when current (Ip) flows in the direction of arrow Ensure proper connection of Power supply to avoid damage to the Sensor ● This Sensor must be used in...

Open the catalog to page 4

Hall Effect Current Sensor HK050…500T09

Hall Effect Current Sensor HK050…500T09

Catalog excerpts

All Electrohms catalogs and technical brochures