HEAT TREATMENT EQUIPMENT & ACCESSORIES
18Pages

Industrial Ovens HEAT TREATMENT EQUIPMENT

Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial furnaces and heat treatment equipment to industrial companies all over the world. We deliver to some of the largest companies in Sweden such as ABB, Siemens and Volvo but also equipment to research carried on at technical universities. A significant segment of our production is exported to Europe and the Middle East. Our furnaces are fully adapted to our customers’ needs and requirements, which make each heating system unique. We make...

Mobile Heat Treatment Center Stress relieving means to slowly heat the work piece to a specific temperature, which is then held constant for some time, followed by slow de-cooling. The temperature is elected between 550 and 800°C, depending on the material composition. Stress relieving is carried out to reduce internal tensions in welding areas, which reduces the risk for stress corrosion, and secondly to remove contained hydrogen from steel. The mobile heat treament centers are used for stress relieving and preheating for pipes and steel constructions. The cabinet is manufactured in...

This graph shows the temperature curves for all six channels in their respective colour. The graph displays the channel's performance for the entire duration of the heat treatment so you can follow the curve history and it is possible zoom in for details. Here is also where you can save data to a This is a printout after processing in the PC. You can see all the necessary information such as object information, sensor locations, client information, temperature curves etc. This information can be inserted before the heat treatment procedure as well as afterwards. You can choose whether you...

TF 8036 / 80312 • Simple programming • 6 + 6 channel program controllers • Manage pre-heating and stress relieving • Up to 4 elements per channel • Program Controller FGH P256 • Graph writer for logging of temperature (0-1000°C) • Stainless steel chassis • Easy to service and easy to change spare parts (relay, contactors etc.) • Standard components (contactors etc.) to facilitate tracking of spare parts at local supplier

TF 4046 • Easy to program • 6 separate channels • Manage pre-heating and ramp/hold time • Up to 2 elements per channel • PID controller • Graph writer for logging of temperature (0-1000°C) • Switch for turning of diagram writer • Stainless steel chassis • Easy to service and easy to change spare parts (relay, contactors etc.) • Standard components (contactors etc.) to facilitate tracking of spare parts at local supplier

TF 4013 • Easy to program • 3 separate channels • Specifically constructed for pre-heating • Up to 4 elements per channel • PID controller • Stainless steel chassis • Easy to service and easy to change spare parts (relay, contactors etc.) • Standard components (contactors etc.) to facilitate tracking of spare parts at local supplier

Supply voltage Secondary current Secondary voltage Total amount of heaters Preheat treatment Automatic Postheat treatment No Touch screen interface No Automatic alarm notify/logg No SMS distance alarm notify No Internet dist. Temp. Measurm. No Internet emergency shutdown No Internet connection control No Only when preheating * Also available in other voltages

Digital Digital Digital Option Option Option Option Option Option Option Option Option Option Option Option

Flexible Ceramic Elements (FCE) Ref.nr Length Width Volt kW tail to tail Other sizes and voltages on request. Flexible Ceramic Elements (FCE) For preheating and stress relieving of pipes, pressure vessels etc. The elements consist of multistrand nickel-chrome resistance wires which run through small “two-hole” ceramic insulators. The insulators together with the resistance wires are very flexible and give a good heat radiation and effective heat transmission. The cold nickel tails and resistance wire are welded together. It is designed to provide a temperature up to 1000°C.

Flexible Preheater Elements (FPE) For preheating of pipes, pressure vessels etc. The elements are supplied with Superwool blanket enclosed in mesh. The blanket is attached to a stainless steel plate which protects from weld splatter. The plate is provided with hooks where magnets can be fixated, which make elements easy to attach. Banding of element is also possible. The FPE can be used on flat surfaces as well as curved. It is designed Channel Elements Used in temporary or stationary ovens and special heating devices. Can be used for preheating or stress relieving. The coiled resistance...

For quick and reliable fastening of preheat Banding tools For simple and stable mounting of heating elements 2. ACME C1204 Banding tool ref.nr 6-108-30 3. ACME C2A5 Sealer ref.nr 6-108-40 2. BAND-IT C001 Banding tool ref.nr 6-108-10 3. BAND-IT C075 Bantam tool ref.nr 6-108-20 4. BAND-IT Band Boxed 201 SS ref.nr 6-107-12 5. BAND-IT Buckles 201 SS ref.nr 6-107-13 6. Mild Steel Band ref.nr 6-107-10 7. Mild Steel Buckles ref.nr 6-107-11 Superwool Blankets 1. Sold in rolls with dimension 7300x600x25 mm 2. Ref.nr Length Width For other dimensions, send an inquiry to our sales staff. Can also be...

Splitter cable Cables for connection of more than one heating element parallel to the secondary power cable. 2-way splitter ref.nr 6-122-2 3-way splitter ref.nr 6-122-3 4-way splitter ref.nr 6-122-4 6-way splitter ref.nr 6-122-6 Secondary cable From transformer to splitter cable. Complete with 300A plug and socket connectors, compensating cable and thermocouple connectors. Length Max Current Dinse 20m 135A ref.nr 6-135-20 30m 135A ref.nr 6-135-30 20m 180A ref.nr 6-180-20 30m 180A ref.nr 6-180-30 20m 280A ref.nr 6-280-20 30m 280A ref.nr 6-280-30 Other lengths on request. Camlock connectors...