Catalogs >
Electro-Sensors >
SpeedTalker-DN(UI)

SpeedTalker-DN(UI)
2Pages

Catalog excerpts

Superior • Systems • Solutions DeviceNet Universal Input Shaft Speed Monitor Provides measured shaft RPM and alarm states Compatible with most pulse output sensors Provides isolated DC sensor power Network powered DIN rail mountable module Integrates into any DeviceNet network ODVA Conformance Tested (file #10390) Product Information Electro-Sensors' SpeedTalker-DN (Ul) converts pulse frequencies from external sensors to RPM units, providing tachometer measurement of up to two rotating shafts and the status of eight alarm functions over DeviceNet. The electrically-isolated inputs are compatible with most pulse-output sensors and signal sources including incremental shaft encoders, prox, photo-eye and Hall-effect sensors. Sensor signals may be single-ended or differential, single-channel or quadrature. The unit is network-powered and provides isolated dc sensor power. Measurable shaft speeds range from 0.0 to 3,276.7 RPM and the unit may be configured for unidirectional or bidirectional speed measurement Each configurable alarm function has on/off, greater/less than, speed threshold, delay time and minimum on-time settings. Configuration is handled over DeviceNet with parameter settings stored in non-volatile memory. An electronic data sheet (EDS) file is provided to aid configuration. RPM measurements and Alarm Status are accessible over the Poll I/O and Explicit Messaging Connections and Alarm Status is provided over the COS I/O connection for slave-initiated alarm notification. Dimensional Drawings • 6111 Blue Circle Drive Superior • Systems • Solutions Free Catalog and Application Assistance

Open the catalog to page 1

SpeedTalker-DN (Ul) Shaft Speed Sensor Sensor Connection Diagrams Terminal Diagram TBI pins 1,2, are SENSOR POWER (+); pins 3,4 are SENSOR POWER (-) TB2 pins 1,2 are Channel A inputs (A, I A); pins 3,4 are Channel B inputs (B, IB) TB3 pins 1,2, 3,4 are DeviceNet v-, CAN-L, CAN-H, V+ (respectively) TB4 (DEVICENET SHIELD) pins 1 ^ 4 are internally connected SpeedTalker-DN (Ul) Shaft Speed Sensor Sensor Input Channels (A to I A, B to IB) 270Q resistor across inputs Sensor Input Speed Measurement/ DeviceNet Implementation (ODVA Conformance file W390) Operating Power (0mA Sensor Power Load)...

Open the catalog to page 2

SpeedTalker-DN(UI) 2Pages

Catalog excerpts

All Electro-Sensors catalogs and technical brochures

SpeedTalker-DN(UI)
2Pages