Superior • Systems • Solutions Remote Display Position Monitor Fully Closed Fully Open Sub-Turn Shaft Monitor • Accurate shaft position feedback — 0° to 130° l\ Precisely measures shaft rotary movement Versatile system — works on powered or manually driven shafts Rugged explosionproof NEMA4X housing — long life & dependability Non-volatile memory — retains shaft position in the event of a power loss • Interface with a PLC or optional TR400-SGA display unit UL, CSA & CE approved to applicable standards SGI OOOE Product Information Electro-Sensors SG1000E Sub-Turn Shaft Position Monitor is a complete position monitoring system housed in a compact and rugged explosionproof NEMA4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure a rotary process such as a shaft position having a clockwise or counter-clockwise rotary movement. The SG1000E works on rotary processes having a full-scale sweep as small as 5.6 degrees (fully-closed to fully-open), up through those having a full-scale sweep as large as The SG1000E has two modes: calibration and normal operating. After installation, a simple calibration procedure is used to program the SG1000E with the encoder values corresponding to the shaft's fully-closed and fully-open position limits. Once programmed, the SG1000E outputs a 4 mA DC signal when the shaft is in the fully-closed position, and outputs a 20 mA DC signal when the shaft is in the fully-open position. When the shaft is at any mid-span position (between fully-closed and fully-open) the SG1000E outputs a signal that is proportionally between 4 and 20 mA. 6111 Blue Circle Drive J&Z^Shi. Free Catalog and Application Assistance ISO9001:2000 Certified Superior - Systems • Solutions WWW.electrO-SenSOrS.COm

SG1000E Sub-Turn Shaft Monitor SG1000E Position Monitor The SG1000E Monitor provides independent and accurate feedback of shaft position via a 4-20mA signal to an external device such as a PLC or optional TR400-SGA display. Optional TR400-SGA Remote Display The TR400-SGA accepts the 4-20 mA signal from the SG1000E monitor and shows the shaft position in desired user units typically 0% to 100%. The TR400-SGA also offers two relays and a 4-20 mA proportional output. Consult factory for further options. Class I, Div 1, Groups C, D Class II, Div 1, Groups E, F, G UL File: E249019 NEMA4X Cast Aluminum...