SG1000C
2Pages

Catalog excerpts

SG1000C Single-Turn Shaft Position Sensor Reliable Products Trustworthy People Slide Gate & Angle Position Features • 4-20 mA position output • 24 VDC powered • Measures shaft angle (rotational) position • Single-turn (0°- 359°) measurement range • Direct shaft attachment (3/8-16 UNC threads) • Cast aluminum explosion proof (XP) housing • UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G) Common Applications Electro-Sensors SG1000C Single-Turn Position Monitor is a complete position monitoring system housed in a compact and rugged explosion proof NEMA 4X housing. It is an encoder-based position sensor providing a 4-20 mA output and is used to measure processes or operations that have a repetitive single turn clockwise or counter clockwise rotary movement. A typical application of the SG1000C is to sense the chute position of a rotary grain distributor. The SG1000C enables the end-user to very accurately monitor shaft position, enabling accurate process control. The SG1000C can also be used in other applications where a single-turn position needs to be monitored. Principle of Operation The SG1000C has two modes: calibration and normal operating. A simple calibration procedure programs the SG1000C with the encoder value corresponding to the 0° (home) position along the process’s rotary travel. Once programmed, the SG1000C outputs a 4 mA DC signal when the encoder is at the 0° (home) position and outputs a 20 mA DC signal when the encoder is at the 359° (full-turn) position. When the encoder is at any mid-span position (between 0° and 359°) the SG1000C outputs a signal that is proportionally between 4 and 20 mA. 6111 BLUE CIRCLE DRIVE

Open the catalog to page 1

SG1000C Single-Turn Shaft Position Sensor Reliable Products Trustworthy People Slide Gate & Angle Position SG1000C Specifications General Specifications Input Power Voltage 24 VDC ± 10% Output Type 4-20 mA standard One full single turn broken Resolution down into 512 positions Accuracy SG1000C Position Sensor The SG1000C provides independent and accurate indication of shaft position via a 4-20 mA signal to an external device such as a PLC or optional TR400SGA display. The optional TR400SGA Remote Display can provide +24 VDC power to the SG1000C, it can display the SG1000C’s 4-20 mA signal...

Open the catalog to page 2

SG1000C 2Pages

Catalog excerpts

All Electro-Sensors catalogs and technical brochures

SG1000C
2Pages